GE FANUC IC200ALG620 Analog Input I/O Industrial Grade Precision Control

IC200ALG620 Analog Input I/O Industrial Grade Precision Control

Type:Analog Input Module Number of Channels:16 Supply Voltage:24VDC Input Range:0 to 20mA, 4 to 20mA Sampling Rate:Up to 100 samples per second Operating Temperature:-40"C to +70"C Storage Temperature:-40"C to +85"C Dimensions (WxHxD):4.5 x 4.5 x 1.7 inches Weight:Approximately 0.4 pounds Experience unparalleled precision with our GE FANUC IC200ALG620 Analog Input I/O Module, designed specifically for industrial automation applications. This robust module is equipped with 16 channels capable of high-speed sampling at up to 10 kHz, ensuring accurate data acquisition under demanding conditions. Engineered for reliability in extreme environments, it operates efficiently within the temperature range of -40"C to +85"C, making it suitable for a wide array of industrial settings. 

Its compatibility with 24 VDC power supply ensures seamless integration with various control systems. Featuring an RS-485 communication interface, this module supports bidirectional data transfer for enhanced system flexibility and efficiency. The compact design, combined with its high accuracy (+/- 0.05%), makes it an ideal choice for applications requiring precise control and monitoring. Manufactured using premium materials, our IC200ALG620 module offers exceptional durability and reliability, backed by industry-leading quality standards. It is compatible with the entire GE FANUC PLC series, providing seamless integration and easy expansion options. With its intuitive design and comprehensive feature set, the GE FANUC IC200ALG620 Analog Input I/O Module simplifies the process of integrating advanced data acquisition capabilities into your industrial automation system, delivering enhanced operational efficiency and productivity. The GE-FANUC IC200ALG620 Analog Input I/O module is designed for industrial automation applications, offering high precision and reliability in analog signal processing.

Compatibility 

ƒ Compatible with any Series 90-30 CPU except IC693CPU321 and IC693CPU340. Configuration size is limited for CPU311/313/331, as described on the next page. 

ƒ Requires release 8.0 CPU firmware. The latest Release 10 is recommended, if available for the particular CPU. 

ƒ Requires CIMPLICITY Machine Edition Logic Developer PLC version 3.0 plus the appropriate service pack or special (or a version later than 3.0). 

ƒ Not compatible with the VersaPro™, Control, or Logicmaster™ programming software. 

ƒ The Series 90-30 Hand-Held Programmer (IC693PRG300) cannot be used to configure this module. New Features The Series 90-30 DeviceNet Master Module allows a Series 90-30 PLC to send and receive I/O data from a DeviceNet network. 

Module features include: 

ƒ Support for all standard data rates (125K, 250K, 500K) 

ƒ Support for 255 bytes input data transfer and 255 bytes output data transfer per slave 

ƒ Support for 3972 bytes of input data transfer and 3972 bytes of output data transfer per master 

ƒ Support for two I/O connections per Slave - Typically one connection is used for Polled and the other is used for Strobe, Cyclic, or COS 

ƒ Support for Poll, Strobe, Cyclic and COS I/O Connections, Fragmented I/O and Explicit Messaging 

ƒ Support for Unconnected Message Manager (UCMM) with 1 proxy connection per slave device 

ƒ Support for configuration of the global scan rate 

ƒ Support for configuration of update rates for Poll and COS/Cyclic on a connection basis 

ƒ Support for PLC-application initiated explicit messaging via a COMMREQ 

ƒ Master can be configured to operate as a slave simultaneously with master operation 

ƒ Configurable fault behavior on loss of communication 

ƒ Reports loss or reestablishment of communication with slaves in PLC fault table (configurable) 

ƒ Support for 64 network device status bits (note: the bit for the master itself is always zero) 

ƒ Firmware update via service port on module