General Electric DS200UPSAG1A Drive Board Power Efficiency for Turbine Control Systems

DS200UPSAG1A Drive Board Power Efficiency for Turbine Control Systems

Processor Type:Advanced microcontroller Operating Temperature Range:-40"C to 70"C Power Consumption:120W max Input Voltage Range:90VAC to 264VAC Output Current:Continuous 15A, Surge 30A Communication Interface:RS-485, Ethernet The General Electric DS200UPSAG1A is engineered to withstand the rigors of industrial environments, ensuring dependable performance under varying conditions. This drive board features advanced power management capabilities, delivering precise control over motor operations and energy consumption. 

 Designed with durability in mind, the DS200UPSAG1A utilizes high-quality materials to maintain optimal performance and longevity, reducing downtime and maintenance costs. Ease of installation and compatibility with existing Mark V Series systems facilitate a smooth integration process, minimizing disruptions to ongoing operations. Our technical support team provides comprehensive documentation and assistance, ensuring users can maximize the potential of the DS200UPSAG1A for their specific applications. Engineered for seamless integration in General Electric  Mark V Turbine Control Systems, the DS200UPSAG1A Drive Board ensures high-performance power supply, critical for maintaining optimal system efficiency and reliability.

Compatibility 

ƒ Compatible with any Series 90-30 CPU except IC693CPU321 and IC693CPU340. Configuration size is limited for CPU311/313/331, as described on the next page. 

ƒ Requires release 8.0 CPU firmware. The latest Release 10 is recommended, if available for the particular CPU. 

ƒ Requires CIMPLICITY Machine Edition Logic Developer PLC version 3.0 plus the appropriate service pack or special (or a version later than 3.0). 

ƒ Not compatible with the VersaPro™, Control, or Logicmaster™ programming software. 

ƒ The Series 90-30 Hand-Held Programmer (IC693PRG300) cannot be used to configure this module. New Features The Series 90-30 DeviceNet Master Module allows a Series 90-30 PLC to send and receive I/O data from a DeviceNet network. 

Module features include: 

ƒ Support for all standard data rates (125K, 250K, 500K) 

ƒ Support for 255 bytes input data transfer and 255 bytes output data transfer per slave 

ƒ Support for 3972 bytes of input data transfer and 3972 bytes of output data transfer per master 

ƒ Support for two I/O connections per Slave - Typically one connection is used for Polled and the other is used for Strobe, Cyclic, or COS 

ƒ Support for Poll, Strobe, Cyclic and COS I/O Connections, Fragmented I/O and Explicit Messaging 

ƒ Support for Unconnected Message Manager (UCMM) with 1 proxy connection per slave device 

ƒ Support for configuration of the global scan rate 

ƒ Support for configuration of update rates for Poll and COS/Cyclic on a connection basis 

ƒ Support for PLC-application initiated explicit messaging via a COMMREQ 

ƒ Master can be configured to operate as a slave simultaneously with master operation 

ƒ Configurable fault behavior on loss of communication 

ƒ Reports loss or reestablishment of communication with slaves in PLC fault table (configurable) 

ƒ Support for 64 network device status bits (note: the bit for the master itself is always zero) 

ƒ Firmware update via service port on module