GE Fanuc IC693CPU374 Advanced Industrial Control System CPU Module

GE Fanuc IC693CPU374 Advanced Industrial Control System CPU Module

Модуль центрального процессора GE Fanuc IC693CPU374 для передовых промышленных систем управления

Processor Speed:40 MIPS Memory Size:32 KB RAM, 128 KB ROM I/O Ports:24 digital I/O, 1 analog input Communication Interface:RS-485, Ethernet Power Consumption:12-24V DC, 100mA Operating Temperature:-10"C to +55"C Engineered for demanding industrial applications, the GE Fanuc IC693CPU374 CPU module is a cornerstone of advanced automation systems, ensuring seamless integration and optimal performance. 

 Featuring a robust 400 MHz processor, this module delivers exceptional speed and efficiency, making it suitable for real-time control processes in manufacturing and processing industries. With 2 MB of memory, the IC693CPU374 supports extensive data handling and sophisticated algorithms, enabling precise control and monitoring of industrial operations. Equipped with 4 RS-485 and 2 Ethernet communication ports, the module facilitates efficient data exchange between various components of an automation system, enhancing connectivity and productivity. 

 Operating within a wide temperature range of -10"C to +55"C, this module ensures reliable performance under diverse environmental conditions, making it a versatile choice for global industrial applications. Crafted with durability and reliability in mind, the GE Fanuc IC693CPU374 is backed by comprehensive technical support and service, ensuring long-term maintenance and optimization for your industrial control needs. The GE Fanuc IC693CPU374 is a high-performance programmable logic controller module designed for industrial automation systems. It offers advanced control capabilities, seamless integration, and enhanced reliability, making it ideal for complex manufacturing environments.

Compatibility 

ƒ Compatible with any Series 90-30 CPU except IC693CPU321 and IC693CPU340. Configuration size is limited for CPU311/313/331, as described on the next page. 

ƒ Requires release 8.0 CPU firmware. The latest Release 10 is recommended, if available for the particular CPU. 

ƒ Requires CIMPLICITY Machine Edition Logic Developer PLC version 3.0 plus the appropriate service pack or special (or a version later than 3.0). 

ƒ Not compatible with the VersaPro™, Control, or Logicmaster™ programming software. 

ƒ The Series 90-30 Hand-Held Programmer (IC693PRG300) cannot be used to configure this module. New Features The Series 90-30 DeviceNet Master Module allows a Series 90-30 PLC to send and receive I/O data from a DeviceNet network. 

Module features include: 

ƒ Support for all standard data rates (125K, 250K, 500K) 

ƒ Support for 255 bytes input data transfer and 255 bytes output data transfer per slave 

ƒ Support for 3972 bytes of input data transfer and 3972 bytes of output data transfer per master 

ƒ Support for two I/O connections per Slave - Typically one connection is used for Polled and the other is used for Strobe, Cyclic, or COS 

ƒ Support for Poll, Strobe, Cyclic and COS I/O Connections, Fragmented I/O and Explicit Messaging 

ƒ Support for Unconnected Message Manager (UCMM) with 1 proxy connection per slave device 

ƒ Support for configuration of the global scan rate 

ƒ Support for configuration of update rates for Poll and COS/Cyclic on a connection basis 

ƒ Support for PLC-application initiated explicit messaging via a COMMREQ 

ƒ Master can be configured to operate as a slave simultaneously with master operation 

ƒ Configurable fault behavior on loss of communication 

ƒ Reports loss or reestablishment of communication with slaves in PLC fault table (configurable) 

ƒ Support for 64 network device status bits (note: the bit for the master itself is always zero) 

ƒ Firmware update via service port on module