GE FANUC 531X175SSBAYM2 Dual Channel BIU CARD

GE FANUC 531X175SSBAYM2 Dual Channel BIU CARD

GE FANUC 531X175SSBAYM2 Двухканальный BIU CARD

Product Type:BIU (Bus Interface Unit) Card Supplier:GE Fanuc Model Number:531X175SSBAYM2 Series:Mark V Dimensions:27.8 cm x 21.6 cm x 1.5 cm Weight:0.36 kg Interface:DC300 Interface Power Consumption:Max. 18 W Connectivity:Jumper Ports for Circuit Control Compatibility:General-purpose drive replacement cards Crafted with precision and engineered for durability, the GE Fanuc 531X175SSBAYM2 Dual Channel BIU Card ensures seamless integration within your existing automation systems. This card is equipped with a toggle switch on the upper edge, facilitating easy configuration and operation, alongside two red LED diodes that provide clear visual feedback on operational status. 

 Designed for maximum performance, it utilizes Jumper Ports to manage smaller circuits efficiently, ensuring optimal system responsiveness and reliability. By incorporating multiple Integrated Circuits (ICs), the card maximizes data storage and processing capabilities, enhancing overall system efficiency. The robust design and compatibility with a wide range of systems make the GE Fanuc 531X175SSBAYM2 Dual Channel BIU Card an indispensable upgrade for enhancing the capabilities of your industrial automation solutions. The GE-FANUC 531X175SSBAYM2 BIU Card is a specialized component designed for high-performance control systems, enhancing operational efficiency and reliability in industrial automation environments.

Compatibility 

ƒ Compatible with any Series 90-30 CPU except IC693CPU321 and IC693CPU340. Configuration size is limited for CPU311/313/331, as described on the next page. 

ƒ Requires release 8.0 CPU firmware. The latest Release 10 is recommended, if available for the particular CPU. 

ƒ Requires CIMPLICITY Machine Edition Logic Developer PLC version 3.0 plus the appropriate service pack or special (or a version later than 3.0). 

ƒ Not compatible with the VersaPro™, Control, or Logicmaster™ programming software. 

ƒ The Series 90-30 Hand-Held Programmer (IC693PRG300) cannot be used to configure this module. New Features The Series 90-30 DeviceNet Master Module allows a Series 90-30 PLC to send and receive I/O data from a DeviceNet network. 

Module features include: 

ƒ Support for all standard data rates (125K, 250K, 500K) 

ƒ Support for 255 bytes input data transfer and 255 bytes output data transfer per slave 

ƒ Support for 3972 bytes of input data transfer and 3972 bytes of output data transfer per master 

ƒ Support for two I/O connections per Slave - Typically one connection is used for Polled and the other is used for Strobe, Cyclic, or COS 

ƒ Support for Poll, Strobe, Cyclic and COS I/O Connections, Fragmented I/O and Explicit Messaging 

ƒ Support for Unconnected Message Manager (UCMM) with 1 proxy connection per slave device 

ƒ Support for configuration of the global scan rate 

ƒ Support for configuration of update rates for Poll and COS/Cyclic on a connection basis 

ƒ Support for PLC-application initiated explicit messaging via a COMMREQ 

ƒ Master can be configured to operate as a slave simultaneously with master operation 

ƒ Configurable fault behavior on loss of communication 

ƒ Reports loss or reestablishment of communication with slaves in PLC fault table (configurable) 

ƒ Support for 64 network device status bits (note: the bit for the master itself is always zero) 

ƒ Firmware update via service port on module