GE Fanuc IC698ETM001 Ethernet Module for Industrial Control Systems

IC698ETM001 Ethernet Module for Industrial Control Systems

Product Type:Ethernet Module Model:IC698ETM001 Speed:200 MHz Voltage:5 Volts DC Current:1.2 Amperes Weight:0.62 kg Interface Connector:10 Base T/100 Base Tx, RJ 45 Serial Port:RS-232 DCE, 1200  115200 bps. D-connector, 9-pin female Series:Rx7i PACsystem The GE-FANUC IC698ETM001 Ethernet Module is a robust, compact device engineered for demanding industrial applications. Its advanced design ensures compatibility with a wide range of control systems and network protocols, optimizing communication between PLCs, drives, and other devices. Equipped with a durable aluminum alloy casing, this module is built to withstand harsh industrial environments, ensuring reliability and longevity. Its efficient power consumption makes it an ideal choice for energy-conscious operations. 

 Supporting up to 10 Mbps data transfer rates, the IC698ETM001 ensures quick and reliable data exchange, crucial for real-time process control and monitoring. The inclusion of multiple network protocols, including EtherNet/IP, Profinet, and DeviceNet, allows for seamless integration with various automation solutions. The integrated RJ45 Ethernet port provides easy connection options, facilitating the setup of a secure and stable network infrastructure. This feature, combined with its compact size, makes it a versatile addition to any industrial automation setup. Compliance with international safety standards, including UL, CE, and T脺V certifications, ensures that the IC698ETM001 meets stringent industry requirements, providing peace of mind to users across different sectors. The GE Fanuc IC698ETM001 Ethernet Module is a vital component designed to expand industrial control networks. It seamlessly integrates with GE  Rx7i PACsystem, enhancing system connectivity and data transfer capabilities.

Compatibility 

ƒ Compatible with any Series 90-30 CPU except IC693CPU321 and IC693CPU340. Configuration size is limited for CPU311/313/331, as described on the next page. 

ƒ Requires release 8.0 CPU firmware. The latest Release 10 is recommended, if available for the particular CPU. 

ƒ Requires CIMPLICITY Machine Edition Logic Developer PLC version 3.0 plus the appropriate service pack or special (or a version later than 3.0). 

ƒ Not compatible with the VersaPro™, Control, or Logicmaster™ programming software. 

ƒ The Series 90-30 Hand-Held Programmer (IC693PRG300) cannot be used to configure this module. New Features The Series 90-30 DeviceNet Master Module allows a Series 90-30 PLC to send and receive I/O data from a DeviceNet network. 

Module features include: 

ƒ Support for all standard data rates (125K, 250K, 500K) 

ƒ Support for 255 bytes input data transfer and 255 bytes output data transfer per slave 

ƒ Support for 3972 bytes of input data transfer and 3972 bytes of output data transfer per master 

ƒ Support for two I/O connections per Slave - Typically one connection is used for Polled and the other is used for Strobe, Cyclic, or COS 

ƒ Support for Poll, Strobe, Cyclic and COS I/O Connections, Fragmented I/O and Explicit Messaging 

ƒ Support for Unconnected Message Manager (UCMM) with 1 proxy connection per slave device 

ƒ Support for configuration of the global scan rate 

ƒ Support for configuration of update rates for Poll and COS/Cyclic on a connection basis 

ƒ Support for PLC-application initiated explicit messaging via a COMMREQ 

ƒ Master can be configured to operate as a slave simultaneously with master operation 

ƒ Configurable fault behavior on loss of communication 

ƒ Reports loss or reestablishment of communication with slaves in PLC fault table (configurable) 

ƒ Support for 64 network device status bits (note: the bit for the master itself is always zero) 

ƒ Firmware update via service port on module