GE Fanuc DS3800NGDC1A Ground Detector Board Advanced Module for Enhanced System Safety

DS3800NGDC1A Ground Detector Board Advanced Module for Enhanced System Safety

Model Number:DS3800NGDC1A Brand:GE Fanuc Series:DS3800 Type:Ground Detector Board Operating Voltage:200V Connector Types:[ 6  4 Ceramic Metal Film Resistors:Yes Capacitor Types:[ ixed Vacuum  eramic  olyester Film Rated Capacitance:[ 00V  00V  0V Technical Support:Originally provided by GE Integrating advanced semiconductor technology, the DS3800NGDC1A Ground Detector Board is specifically engineered for critical safety applications in manufacturing plants, ensuring uninterrupted operation and enhanced worker safety. Equipped with a high-speed processing core, this board delivers exceptional performance, enabling precise detection and response to ground faults within industrial circuits. 

 Utilizing state-of-the-art ceramic metal film resistors and vacuum, ceramic, and polyester film capacitors, the DS3800NGDC1A ensures unparalleled reliability and longevity, surpassing industry standards for electrical integrity. Offering a compact yet robust design, it seamlessly integrates into existing control systems, facilitating quick installation and maintenance, thus minimizing downtime and maximizing efficiency. Backed by extensive technical documentation and support from GE Fanuc, customers can leverage comprehensive resources for optimal performance tuning, troubleshooting, and system integration. Experience peace of mind with the DS3800NGDC1A, designed to safeguard your operations against potential hazards, providing a reliable foundation for advanced industrial automation. The GE Fanuc DS3800NGDC1A Ground Detector Board is an advanced component designed for industrial control systems, ensuring enhanced safety by monitoring ground conditions. 

Compatibility 

ƒ Compatible with any Series 90-30 CPU except IC693CPU321 and IC693CPU340. Configuration size is limited for CPU311/313/331, as described on the next page. 

ƒ Requires release 8.0 CPU firmware. The latest Release 10 is recommended, if available for the particular CPU. 

ƒ Requires CIMPLICITY Machine Edition Logic Developer PLC version 3.0 plus the appropriate service pack or special (or a version later than 3.0). 

ƒ Not compatible with the VersaPro™, Control, or Logicmaster™ programming software. 

ƒ The Series 90-30 Hand-Held Programmer (IC693PRG300) cannot be used to configure this module. New Features The Series 90-30 DeviceNet Master Module allows a Series 90-30 PLC to send and receive I/O data from a DeviceNet network. 

Module features include: 

ƒ Support for all standard data rates (125K, 250K, 500K) 

ƒ Support for 255 bytes input data transfer and 255 bytes output data transfer per slave 

ƒ Support for 3972 bytes of input data transfer and 3972 bytes of output data transfer per master 

ƒ Support for two I/O connections per Slave - Typically one connection is used for Polled and the other is used for Strobe, Cyclic, or COS 

ƒ Support for Poll, Strobe, Cyclic and COS I/O Connections, Fragmented I/O and Explicit Messaging 

ƒ Support for Unconnected Message Manager (UCMM) with 1 proxy connection per slave device 

ƒ Support for configuration of the global scan rate 

ƒ Support for configuration of update rates for Poll and COS/Cyclic on a connection basis 

ƒ Support for PLC-application initiated explicit messaging via a COMMREQ 

ƒ Master can be configured to operate as a slave simultaneously with master operation 

ƒ Configurable fault behavior on loss of communication 

ƒ Reports loss or reestablishment of communication with slaves in PLC fault table (configurable) 

ƒ Support for 64 network device status bits (note: the bit for the master itself is always zero) 

ƒ Firmware update via service port on module