GE FANUC IC754VGI06STD Advanced Industrial Control Panel

GE FANUC IC754VGI06STD  Advanced Industrial Control Panel

Processor Speed:Dual-core ARM Cortex-A9 up to 1 GHz Operating System:RTOS based on FreeRTOS Display Size:7-inch WVGA LCD Touch Technology:Capacitive multi-touch Communication Interfaces:Ethernet, RS-232, CANopen, Modbus TCP/IP Storage:Internal memory of 4 GB Power Supply:DC 24V or 12V Operating Temperature:-10"C to +50"C Humidity Range:0% to 95% non-condensing Dimensions:165mm x 240mm x 45mm IP Rating:IP65 Certifications:CE, UL, CSA, EN 50155 The GE FANUC IC754VGI06STD QuickPanel is an advanced HMI solution tailored for industrial environments, featuring a sleek, compact design that fits seamlessly into any production line. With its capacitive multi-touch display, users can interact with the interface intuitively, enhancing operational efficiency and reducing training time.

 Equipped with a robust dual-core ARM Cortex-A9 processor, this HMI ensures smooth operation even under demanding conditions, providing quick response times and efficient data processing. Supporting a wide range of communication interfaces, including Ethernet, RS-232, CANopen, and Modbus TCP/IP, the QuickPanel facilitates easy integration with diverse control systems and machinery. Designed for reliability and durability, the IC754VGI06STD operates within a broad temperature range (-10"C to +50"C) and maintains IP65 protection against dust and water splashes, ensuring continuous performance in harsh industrial settings. The GE FANUC IC754VGI06STD QuickPanel is a high-performance industrial touchscreen controller designed for advanced automation systems. It offers a user-friendly interface and seamless integration, ideal for applications requiring precise control and data visualization.

Compatibility 

ƒ Compatible with any Series 90-30 CPU except IC693CPU321 and IC693CPU340. Configuration size is limited for CPU311/313/331, as described on the next page. 

ƒ Requires release 8.0 CPU firmware. The latest Release 10 is recommended, if available for the particular CPU. 

ƒ Requires CIMPLICITY Machine Edition Logic Developer PLC version 3.0 plus the appropriate service pack or special (or a version later than 3.0). 

ƒ Not compatible with the VersaPro™, Control, or Logicmaster™ programming software. 

ƒ The Series 90-30 Hand-Held Programmer (IC693PRG300) cannot be used to configure this module. New Features The Series 90-30 DeviceNet Master Module allows a Series 90-30 PLC to send and receive I/O data from a DeviceNet network. 

Module features include: 

ƒ Support for all standard data rates (125K, 250K, 500K) 

ƒ Support for 255 bytes input data transfer and 255 bytes output data transfer per slave 

ƒ Support for 3972 bytes of input data transfer and 3972 bytes of output data transfer per master 

ƒ Support for two I/O connections per Slave - Typically one connection is used for Polled and the other is used for Strobe, Cyclic, or COS 

ƒ Support for Poll, Strobe, Cyclic and COS I/O Connections, Fragmented I/O and Explicit Messaging 

ƒ Support for Unconnected Message Manager (UCMM) with 1 proxy connection per slave device 

ƒ Support for configuration of the global scan rate 

ƒ Support for configuration of update rates for Poll and COS/Cyclic on a connection basis 

ƒ Support for PLC-application initiated explicit messaging via a COMMREQ 

ƒ Master can be configured to operate as a slave simultaneously with master operation 

ƒ Configurable fault behavior on loss of communication 

ƒ Reports loss or reestablishment of communication with slaves in PLC fault table (configurable) 

ƒ Support for 64 network device status bits (note: the bit for the master itself is always zero) 

ƒ Firmware update via service port on module