GE IS200ERIOH1A Exciter Regulator I/O Board, Designed for Unmatched Performance in Industrial Control Systems

GE IS200ERIOH1A  Exciter Regulator I/O Board, Designed for Unmatched Performance in Industrial Control Systems

Manufacturer:General Electric (GE) Model Number:IS200ERIOH1A Manufacturing Location:Salem, VA, USA Product Type:Exciter Regulator I/O Board Applications:Redundant and Simplex Excitation Control I/O Interface:Customer and System I/O for Regulator Control Compatible Systems:EX2100 Excitation Regulator and Mark VI series Operating Voltage:220 V Output Frequency:50 kHz Certification:IS200ERIOH1A certified product Series:IS200ERIOH1A Material Coding:IS200ERIOH1A Dimensions (L x W x H):Specific dimensions provided upon request Weight:Approximately 0.5 kg The GE IS200ERIOH1A board is specifically designed for integration into advanced power generation systems, enhancing operational efficiency and reliability.

 This board seamlessly connects the excitation regulator with external devices, enabling precise control over voltage levels and power distribution. Engineered for both redundancy and simplex configurations, the IS200ERIOH1A ensures robust performance under various operating conditions, crucial for maintaining stable power supply. Manufactured using high-grade materials, the board withstands harsh industrial environments, guaranteeing longevity and reliability. Comprehensive compatibility with GE  EX2100 series and the broader Mark VI platform ensures a seamless upgrade path for existing installations, minimizing downtime and maximizing system integration. The GE IS200ERIOH1A is a high-performance I/O board designed specifically for exciter regulator systems, ensuring reliable control and enhanced efficiency in industrial applications. 

Compatibility 

ƒ Compatible with any Series 90-30 CPU except IC693CPU321 and IC693CPU340. Configuration size is limited for CPU311/313/331, as described on the next page. 

ƒ Requires release 8.0 CPU firmware. The latest Release 10 is recommended, if available for the particular CPU. 

ƒ Requires CIMPLICITY Machine Edition Logic Developer PLC version 3.0 plus the appropriate service pack or special (or a version later than 3.0). 

ƒ Not compatible with the VersaPro™, Control, or Logicmaster™ programming software. 

ƒ The Series 90-30 Hand-Held Programmer (IC693PRG300) cannot be used to configure this module. New Features The Series 90-30 DeviceNet Master Module allows a Series 90-30 PLC to send and receive I/O data from a DeviceNet network. 

Module features include: 

ƒ Support for all standard data rates (125K, 250K, 500K) 

ƒ Support for 255 bytes input data transfer and 255 bytes output data transfer per slave 

ƒ Support for 3972 bytes of input data transfer and 3972 bytes of output data transfer per master 

ƒ Support for two I/O connections per Slave - Typically one connection is used for Polled and the other is used for Strobe, Cyclic, or COS 

ƒ Support for Poll, Strobe, Cyclic and COS I/O Connections, Fragmented I/O and Explicit Messaging 

ƒ Support for Unconnected Message Manager (UCMM) with 1 proxy connection per slave device 

ƒ Support for configuration of the global scan rate 

ƒ Support for configuration of update rates for Poll and COS/Cyclic on a connection basis 

ƒ Support for PLC-application initiated explicit messaging via a COMMREQ 

ƒ Master can be configured to operate as a slave simultaneously with master operation 

ƒ Configurable fault behavior on loss of communication 

ƒ Reports loss or reestablishment of communication with slaves in PLC fault table (configurable) 

ƒ Support for 64 network device status bits (note: the bit for the master itself is always zero) 

ƒ Firmware update via service port on module