General Electric IS230STCIH4A Advanced Contact Input Assembly for Industrial Automation

General Electric IS230STCIH4A  Advanced Contact Input Assembly for Industrial Automation

Operating Voltage:12-24V DC Contact Rating:5A @ 24V DC Input Type:Dry Contact Switching Speed:鈮?5ms Operating Temperature Range:-40"C to +70"C Reliability Rating:MTBF > 1 million hours Electrical Insulation Resistance:鈮?1000M惟 Mechanical Life:5 million cycles This contact input assembly from General Electric is engineered with robust materials to withstand harsh industrial environments, ensuring prolonged service life and minimal maintenance requirements. Featuring a compact design and durable construction, it seamlessly integrates into various control systems, providing precise and consistent signal transmission under diverse operational conditions.

 The assembly is equipped with high-quality contacts that guarantee low resistance and fast switching, enhancing system responsiveness and reliability. With an extensive temperature range compatibility, it can operate effectively in extreme conditions, making it suitable for applications in manufacturing, energy, and process industries where reliability is paramount. Backed by General Electric  commitment to quality and innovation, this product comes with comprehensive support and a long-term warranty, ensuring customer satisfaction and peace of mind. The General Electric IS230STCIH4A Contact Input Assembly is an advanced component designed for seamless integration into industrial control systems. It specializes in providing precise input signals for enhanced system performance.

Compatibility 

ƒ Compatible with any Series 90-30 CPU except IC693CPU321 and IC693CPU340. Configuration size is limited for CPU311/313/331, as described on the next page. 

ƒ Requires release 8.0 CPU firmware. The latest Release 10 is recommended, if available for the particular CPU. 

ƒ Requires CIMPLICITY Machine Edition Logic Developer PLC version 3.0 plus the appropriate service pack or special (or a version later than 3.0). 

ƒ Not compatible with the VersaPro™, Control, or Logicmaster™ programming software. 

ƒ The Series 90-30 Hand-Held Programmer (IC693PRG300) cannot be used to configure this module. New Features The Series 90-30 DeviceNet Master Module allows a Series 90-30 PLC to send and receive I/O data from a DeviceNet network. 

Module features include: 

ƒ Support for all standard data rates (125K, 250K, 500K) 

ƒ Support for 255 bytes input data transfer and 255 bytes output data transfer per slave 

ƒ Support for 3972 bytes of input data transfer and 3972 bytes of output data transfer per master 

ƒ Support for two I/O connections per Slave - Typically one connection is used for Polled and the other is used for Strobe, Cyclic, or COS 

ƒ Support for Poll, Strobe, Cyclic and COS I/O Connections, Fragmented I/O and Explicit Messaging 

ƒ Support for Unconnected Message Manager (UCMM) with 1 proxy connection per slave device 

ƒ Support for configuration of the global scan rate 

ƒ Support for configuration of update rates for Poll and COS/Cyclic on a connection basis 

ƒ Support for PLC-application initiated explicit messaging via a COMMREQ 

ƒ Master can be configured to operate as a slave simultaneously with master operation 

ƒ Configurable fault behavior on loss of communication 

ƒ Reports loss or reestablishment of communication with slaves in PLC fault table (configurable) 

ƒ Support for 64 network device status bits (note: the bit for the master itself is always zero) 

ƒ Firmware update via service port on module