GE IS200JPDCG1A JPDC POWER DIST DB

GE IS200JPDCG1A JPDC POWER DIST DB

Part Number IS200JPDCG1A Manufacturer General Electric Country of Manufacture As Per GE Manufacturing Policy Series Mark VIe Function Module Availability In StockThe IS200JPDCG1A is a JPDC Power Distribution Module from GE's Mark VI. The Mark VI system is part of the Speedtronic series of steam or gas turbine management systems, which has been in use in various forms since the 1960s. The IS200JPDCG1A is a printed circuit board with a lot of components. This board uses standoffs and screw mounts to attach to a metal sub-panel. 

Through board cutouts, this sub-panel adds many connectors, including screw connects and stab-on connectors that utilize surface wire. A large vertical component can also be mounted to the bottom right corner of the board, where there is a small rectangular cut-out in the board edge, using the subpanel. This vertical component wires in through surface wiring attached to a two-pin plug and connects to the PCB via a female multi-pin connection. A five-position terminal strip is situated next to three small three-position terminal strips on the IS200JPDCG1A. On the board, there are seven toggle switches: one single switch, three lines of three, and three lines of three with a warning sticker that reads, "After withdrawing power, wait 30 seconds before re-energizing." 

Two LEDs, twenty fuses, a male ribbon connector, and 52 plug connectors of various sizes, ranging from 2- to 12-position plugs, make up the board. A jumper switch, a transformer, transistors, varistors, capacitors, resistors, and integrated circuits are among the other components on the board. Reference designators are used to identify certain components. Codes, the board ID number, and the round GE emblem are all printed on the board.

Main Functions

Power system monitoring and control:

The power interface board can be used for power system monitoring and control equipment to ensure the safe, stable and reliable operation of the power system.

Power plant automation:

In the power plant, it can be used to connect and manage the power supply of the mastering system and monitoring equipment to improve the automation level of the power plant.

Power transformer and distribution:

Applicable to substations and distribution stations, it is used to govern the power supply of transformers, circuit breakers and other equipments to ensure the high efficiency of power transmission and distribution.

Industrial Process Mastering:

In manufacturing and chemical workshops, this power interface board can be used for power management of automation systems, inner and control equipment to enhance productivity and safety.

Building Automation:

It can be used in building automation system, power supply to lighting, air conditioning, security equipment, etc., to achieve intelligent management of building equipment.

Railway flag signal system:

In the railway system, it is used in the power management of railway flag signal equipment and control system to ensure the stable operation of railway signal system.

Smart Grid:

In the smart grid, the power interface board can be used to connect and manage the digital power equipment and promote the intelligent development of the power grid.

Traffic Flag Signal System:

In the traffic flag signal system of routes and intersections, it is used to supply power to the flag master and equipment to ensure the normal display of traffic signals.

Aerospace:

In aviation and aerospace, the power interface board can be used in the control system of aircraft and spacecraft to provide stable and reliable power support.

It is suitable for land initiatives, oilfield equipment and other categories, providing power support for various land engineering equipment.

Instructions and warnings related to the operation of the product:

The following specifications must be strictly observed:

 The technical specifications and typical applications of the product system must be strictly observed.

 PERSONNEL TRAINING: Only trained personnel may install, operate, maintain or repair the product system. These personnel must be instructed on the

These personnel must be instructed and briefed on the conditions in the hazardous area.

 Unauthorised modifications: No modifications or structural changes may be made to the product system.

 Maintenance Responsibility: It must be ensured that the product system is used only under appropriate conditions and in a condition fully suitable for use.

 Working environment: The user must fulfil the specified environmental conditions:

Safety regulations

The following safety regulations must be fully observed when (maintenance) work is carried out on the product system:

1 Disconnect completely.

2 Secure to prevent reconnection.

3 Confirm that the installation has been completed.

4 Perform grounding and short-circuiting.