GE IS200JPDMG1A - POWER DISTRIBUTION BOARD

GE IS200JPDMG1A - POWER DISTRIBUTION BOARD

Part Number IS200JPDMG1A Manufacturer General Electric Country of Manufacture As Per GE Manufacturing Policy Series Mark VIe Function Module Availability In StockIS200JPDMG1A is a Power Distribution Module developed by GE under Mark VI. The Speedtronic Mark VI is a gas and steam turbine management system that has been in use for decades. The Mark VI is one of the most complex models in the series, including Ethernet connectivity, triple redundant control configuration within the Control Module, and an HMI Operator Interface based on a PC running Windows. The IS200JPDMG1A is a board for power distribution. 

Two 50-pin connections (P1/P2) are used on the board. It features a total of twelve fuses in three lines. A PPDA I/O pack is connected to the board through a DC62 female connection (JA1). Two terminal blocks are located on opposing sides of the PCB on the board. Three power buses are accessible through these terminal blocks. Each screw on the terminal blocks can handle a maximum of 35 amps. Three 9-position plugs, seven 2-position plugs, and three 6-position plugs make up the IS200JPDMG1A's total of thirteen plugs. Four varistors, three inductor coils, transistors, resistors, and capacitors are also on the board. The IS200JPDMG1A is mounted on a DIN-rail. The board is 6.5 by 7 inches.Module manufactured by General Electric as part of the Mark VI/VIe Series used in gas turbine sppedtronic control systems

Features 

▪ Contains 10 Mbytes of battery-backed user memory and 10 Mbytes of non-volatile flash user  memory. 

▪ Provides access to bulk memory via reference table %W. 

▪ Configurable data and program memory. 

▪ Programming in Ladder Diagram, C, Structured Text, and Function Block Diagram. 

▪ Supports auto-located Symbolic Variables that can use any amount of user memory. 

▪ Reference table sizes include 32Kbits for discrete %I and %Q and up to 32K words each for  analog %AI and %AQ. 

▪ Supports Series 90-70 discrete and analog I/O, communications, and other modules. For a  list of modules supported, refer to the PACSystems RX7i Installation Manual, GFK-2223. 

▪ Supports all VME modules supported by Series 90-70. 

▪ Supports RX7i data monitoring over the web. Allows a combined total of up to 16 web server  and FTP connections. 

▪ Supports up to 512 program blocks. Maximum size for a block is 128KB. 

▪ Test Edit mode allows you to easily test modifications to a running program. 

▪ Bit-in-word referencing. 

▪ Battery-backed calendar clock. 

▪ In-system upgradeable firmware. 

▪ Three isolated serial ports: an RS-485 serial port, an RS-232 serial port, and an RS-232  Ethernet station manager serial port. 

▪ The embedded Ethernet interface provides: 

- Data exchange using Ethernet Global Data (EGD) 

- TCP/IP communication services using SRTP 

- Support for SRTP Channels, Modbus/TCP Server, and Modbus/TCP Client 

- Full programming and configuration services 

- Comprehensive station management and diagnostic tools 

- Two full-duplex 10BaseT/100BaseT/TX (RJ-45 Connector) ports with an internal network  switch providing auto-negotiated network speed, duplex mode, and crossover detection. 

- User-configurable Redundant IP address 

- Time synchronization to SNTP time server on Ethernet network (when used with  Release 5.00 or later CPU module).