GE IS200SPROS1A - PPRO TERMILAN BOARD

GE IS200SPROS1A - PPRO TERMILAN BOARD

Part Number IS200SPROS1A Manufacturer General Electric Country of Manufacture As Per GE Manufacturing Policy Series Mark VIe Function Module Availability In StockThe terminal board IS200SPROS1A is part of the General Electrics Speedtronic Mark VI gas turbine control. The current state-of-the-art control for GE Turbines is the GE General Electric Mark VI Speedtronic Turbine Control System. It's a fully integrated control system with protection and monitoring for gas and steam turbine generators and mechanical drive applications. Mark VI is an associate of GE's Speedtronic product line, which had been around for decades. 

The Speedtronic series went through several iterations, beginning with the Mark I in 1969. The Mark VI came with a PC-based operator interface that came pre-loaded with brand-specific software like CIMPLICITY graphics and the GE Control System Toolbox. The Control Module, which comes in either a 13- or 21-slot standard VME card rack, is at the heart of the Mark VI Turbine Control System. The Control Module receives inputs via termination boards with barrier or box-type terminal blocks and passive signal conditioning. Each I/O card has a TMS320C32 DSP processor that digitally filters data before converting it to IEEE-854 32-bit floating-point format. The data is then stored in dual port memory, which can be accessed via the onboard C32 DSP as well as the VME bus.Module manufactured by General Electric as part of the Mark VI/VIe Series used in gas turbine sppedtronic control systems

Benefits

 Single slot CPU 

 Provides 1 Mbyte of battery-backed memory in the same slot (up to 512 Kbytes available for use by ladder diagram application program)  Supports floating point calculations 

 Up to 12K discrete inputs and outputs (any mix - simplex mode only); 2048 voted discrete inputs, 2048 voted discrete outputs Up to 8K analog inputs (simplex mode only) and 8K analog outputs (simplex mode only); 1024 voted analog inputs 

 0.4 microseconds per boolean function 

 64 MHz, 80486DX2 microprocessor 

 Supports IC660/IC661 I/O (and IC697 I/O in simplex mode only) 

 Programmed by MS-DOS

, or Windows

 software products running on Windows

 95 or Windows NT

 over Ethernet TCP/IP or through the SNP port. 

 Configurable data and program memory 

 Battery-backed calendar clock 

 Three position operation mode switch 

 Password controlled access 

 Remote programmer keyswitch memory protection 

 Four status LEDs 

 Software configuration (No DIP switches or jumpers) 

 Reference information inside front door 

 In-system upgradable firmware

Product Features

High performance: adopting high-performance microprocessor and advanced control algorithm, it can realise fast and accurate control and monitoring, and improve production efficiency and product quality.

Modular design: It is convenient for users to configure and expand, which improves the flexibility and maintainability of the system.

Easy Integration: Provide standard communication interface and protocol, which is convenient for users to integrate with other equipments and achieve seamless connection.

High reliability: Made of high-quality materials and advanced technology, it has high reliability and stability, and can operate stably under harsh working environment.

Easy to use: Provides simple interface and easy-to-operate software, which is convenient for users to install and use. At the same time, the module also has a self-diagnostic function, which can help users quickly locate faults and maintenance.

Good scalability: can be seamlessly integrated with other ABB modules and equipment, which is convenient for users to build a large-scale automation control system.