GE IS200TTURH1C - TERMINATION BOARD, T

GE IS200TTURH1C - TERMINATION BOARD, T

Part Number IS200TTURH1C Manufacturer General Electric Country of Manufacture As Per GE Manufacturing Policy Series Mark VIe Function Module Availability In StockIS200TTURH1C is a GE Mark VI series Turbine Control Terminal Board. This circuit board is made to work with the company's subsequent Speedtronic systems. This applies to both the Mark VI and the Mark VIe systems. Both of these systems, as well as components for previous Speedtronic systems, are in stock and ready to ship at WOC. Since the first iteration became available for industrial gas and steam turbine management in the late 1960s, Speedtronic systems have progressively become more complicated. With a few minor perforations, the IS200TTURH1C is essentially rectangular. 

The board is used in conjunction with other PCBs such as the PTUR and VTUR boards to control the generator's synchronization. This is generally accomplished through the use of hardware and connections. There are numerous surface-mounted relays on the board. Additionally, the board employs variable resistors and features two transformers at the board's center. D-shell connections (both male and female), plug connectors, and terminal blocks are used to communicate with other board components. Screw-mounted connectors are numbered for reference on the board's two main terminal blocks. The IS200TTURH1C additionally has two jumper switches that can be used to alter the board circuits to allow for simplex or TMR voting.Module manufactured by General Electric as part of the Mark VI/VIe Series used in gas turbine sppedtronic control systems

Benefits

 Single slot CPU 

 Provides 1 Mbyte of battery-backed memory in the same slot (up to 512 Kbytes available for use by ladder diagram application program)  Supports floating point calculations 

 Up to 12K discrete inputs and outputs (any mix - simplex mode only); 2048 voted discrete inputs, 2048 voted discrete outputs Up to 8K analog inputs (simplex mode only) and 8K analog outputs (simplex mode only); 1024 voted analog inputs 

 0.4 microseconds per boolean function 

 64 MHz, 80486DX2 microprocessor 

 Supports IC660/IC661 I/O (and IC697 I/O in simplex mode only) 

 Programmed by MS-DOS

, or Windows

 software products running on Windows

 95 or Windows NT

 over Ethernet TCP/IP or through the SNP port. 

 Configurable data and program memory 

 Battery-backed calendar clock 

 Three position operation mode switch 

 Password controlled access 

 Remote programmer keyswitch memory protection 

 Four status LEDs 

 Software configuration (No DIP switches or jumpers) 

 Reference information inside front door 

 In-system upgradable firmware