GE IS215PMVDH1A Migration I/O Terminal Board

GE IS215PMVDH1A Migration I/O Terminal Board

Part Number IS215PMVDH1A Manufacturer General Electric Country of Manufacture As Per GE Manufacturing Policy Series Mark VI Function Module Availability In StockIS215PMVDH1A is a Migration Input-Output Terminal Board manufactured and designed by General Electric. It is a part of the Mark VIe Series used in GE Distributed Gas Turbine Control Systems. The Migration I/O Terminal Board acts as an interface between the new and old control systems, allowing for the transfer of data and signals between the two systems. This can be particularly useful when the new system uses different communication protocols or signal types than the legacy system. 

 FEATURES The PMVD module is suitable for use with control module applications, as well as in triple modular redundant or simplex architectures. Please keep in mind that when using simplex architecture, only a control module will be used. It is compatible with a variety of terminal board types including the DTBD, DTBB, DTBA, and DTBC boards. During board operation, there are two main input and output types: contact inputs and relay contact outputs. There is a specific number associated with each input and output type; for example, there are sixty outputs in relation to the relay contact outputs, but only ninety-six contact inputs. During the operation of the PMVD board, which is a TCRA board, an interface board is also typically required. 

This model is classified as a termination box. It should be noted that the PMVD model has several group variations; this model is an H1A variation and cannot be removed. The board may also have additional features such as signal conditioning, surge protection, or isolation to ensure that the signals being transferred are accurate and reliable. Overall, using Migration I/O Terminal Boards in control system migration can simplify the process of upgrading or replacing legacy systems, reducing the cost and complexity of the project.

Ethernet NIU001 PLUS Features

▪ 20Kbytes of optional local logic. Supports all  languages except C programming. 

▪ 10 Mbytes of built-in flash memory for local user data  storage.  

▪ Battery-backed Real Time Clock. 

▪ In-system upgradeable firmware. 

▪ Two serial ports: an RS-485 serial port and an  RS-232 serial port. 

▪ Supports Ethernet communications via the backplanebased Ethernet Interface module (IC695ETM001) 

▪ Data exchange using EGD 

▪ TCP/IP communication services using SRTP 

▪ Comprehensive station management/diagnostic tools 

▪ Supports operation with redundant controllers

Ease of Use

• Simple and powerful instruction set 

• One-axis or two-axis motion programs with synchronized block start 

• Program support for a short motion program (called Program Zero) which can be created in the MS-DOS programming software configuration function 

• Nonvolatile (flash) storage for 10 programs and 40 subroutines 

• User scaling of programming units (in Standard mode only) 

• Generic programming using command parameters as operands for Acceleration, Velocity, Move and Dwell commands 

• Configured with MS-DOS configuration software 

SPECIFICATIONS

Part Number: IS215PMVDH1A
Manufacturer: General Electric
Series: Mark VIe
Product Type: Migration Input-Output Terminal Board
Operating System: QNX
Power Requirements: +5 V dc, 6 A
Number of input channels: 24
Number of relay channels: 12
Trip Solenoid Rating: 125 V dc
Power supply voltage: 28 V dc
Voltage Range: 18 - 32 VDC
Mounting: DIN-rail mounting
Technology: Surface mount
Operating temperature: 40 to 70°C
Size: 168 x 150 x 55 mm
Repair: 3-7 Day
Availability: In Stock
Country of Origin: United States
Manual: GEH-6421G