ABB NKAS11-12 Analog Slave Termination Unit Cable - 12 foot

ABB NKAS11-12 Analog Slave Termination Unit Cable - 12 foot

Technical Parameters

Rated voltage: generally around 24V DC, which can stably provide working voltage for analog slave terminal units to ensure their normal operation and signal transmission.

Rated current: According to the connected equipment and load, the rated current is usually between 0.5A and 1.5A, which can meet the power demand of multiple analog slave terminal units.

Characteristic impedance: commonly 50Ω or 75Ω, matching the impedance of other devices and networks in the system to achieve efficient signal transmission and reduce signal reflection and attenuation.

Signal Transmission Rate: Supports high data transmission rates, typically up to several Mbps or higher, for fast and accurate transmission of analog signals and control commands.

Structure and Material

Conductor: High purity copper is used to ensure good electrical conductivity and signal transmission quality, reduce resistance, and minimize signal attenuation in the transmission process.

Insulation layer: usually high-quality polyvinyl chloride (PVC), cross-linked polyethylene (XLPE) or polytetrafluoroethylene (PTFE) and other insulating materials, with good insulation, voltage resistance and low-loss characteristics, which can effectively prevent short-circuiting between the conductor and signal leakage.

Shield: mostly copper tape or woven copper mesh structure, can provide good electromagnetic shielding effect, effectively prevent external electromagnetic interference on the internal signal, but also to avoid internal signal radiation to the outside, to ensure the stability and reliability of signal transmission.

Sheath: Generally adopts low smoke halogen free material or flame retardant PVC material, which has good resistance to abrasion, corrosion, weather aging and flame retardant properties, and can protect the internal structure of the cable in harsh industrial environments and improve the service life and safety of the cable.

FEATURES

• Process Station with integrated fieldbus  capability  

• 4 high-speed fieldbus lines  

• Supports different fieldbus types, even  simultaneously:  PROFIBUS-DP, up to 12 MBd  Modbus  CAN  Foundation Fieldbus H1 (with LD800  HSE)  

• Easy engineering:  fully integrated in Control Builder F  

• One unified database for field devices  shared by the control level and the Human  System Interface (HSI)  

• Module recognition with factory and operational parameters  

• Comprehensive diagnostics for proactive  maintenance  

• Compact, rugged design  

• Front panel connectors  

• DIN Rail (C-rail) or wall mounting for easy  installation  

• Ambient temperature 0-60 °C (32-140 °F)  with temperature monitoring  

• EMC certification according to EN50082  

• Certification:  CE, NAMUR, CSA, UL, EN61000-6-2.

Our Main Brands

· - ABB Advant-800xA，Advant OCS，Bailey Infi 90 and Net 90，H&B Freelance 2000，DSQC Robots，IGCT / IGBT

· - GE General Electric Field Control, Genius I/O, QuickPanel, RX3i PacSystem, Series 90, Series 90, Series VersaMax

· - Allen Bradley Allen-Bradley SLC500, MicroLogix, CompactLogix, ControlLogix, PLC-5, Panel View,

· - Bently Nevada 3300 System, 3500 System

· - Honeywell 7800 Series, FSC, IPC, Mxopen, TDC 2000, TDC 3000, Experion PKS(C200,C300)

· - Yokogawa Centum CS - Centum VP, Centum XL - micro XL, FA-M3, ProSafe-PLC

· - Ovation, Foxboro, EPRO, Emerson DeltaV, Fuji, Siemens, HIMA, Prosoft, Invensys Triconex, ICS TRIPLEX, Woodward, Bachmann, Schneider