ABB H&B Contronic PE 01 Motor Module 66072-2-0007 H&B Contronic

ABB H&B Contronic PE 01 Motor Module 66072-2-0007 H&B Contronic

Basic information

Model number: The model number PE 01, product number 66072 - 2 - 0007, belongs to the H&B Contronic range, a number that facilitates its precise identification during product management and maintenance.

Appearance and dimensions (presumably): Although not explicitly mentioned, as a motor module its dimensions may vary depending on the motor power and the application scenario, and there are usually interfaces and fixings for electrical connections.

Functional features

Motor control function: It is mainly used for precise control of the motor, including controlling the motor's start, stop, speed adjustment, steering control and other functions. It can output suitable electrical signals to drive the motor according to the preset parameters or receive instructions from the external control system.

Signal Processing Capability: It is capable of processing a variety of signals related to motor operation, such as current feedback signals, speed feedback signals and so on. Through the analysis and processing of these signals, closed-loop control of the motor is achieved to ensure the stability and accuracy of the motor running state.

Protection function: Built-in motor protection mechanism, such as overload protection, short circuit protection and so on. When the motor runs abnormally, such as excessive current or short-circuit fault, the module can quickly take measures, such as cutting off the power supply or adjusting the output signal, to protect the motor from damage.

Application Fields

Industrial automation: In the process of industrial production, it is widely used in all kinds of equipments that need motor drive, such as conveyor belt motors in automated production lines, joint motors of robotic arms, spindle motors of machine tools, etc. The PE 01 module can be accurately controlled by the power supply. The precise control of the PE 01 module enables the automation and efficiency of the production process.

Logistics and Warehousing: Used for motor control of automatic guided vehicles (AGV) in warehousing equipment, motor control of lifting and lowering of automated shelves, etc., to improve the degree of automation and efficiency of logistics operations.

Energy-related equipment: in some small power generation equipment or energy conversion equipment, used to control the operation of the motor, such as wind generator yaw motor, small hydroelectric generator speed control motor.

FEATURE

• Low-impedance busbar protection 

• Stub and T-zone protection 

• High functional reliability due to two independent measurement criteria: 

- stabilized differential current algorithm 

- directional current comparison algorithm 

• Phase-by-phase measurement 

• Reduced CT performance requirements 

• High through-fault stability even in case of  CT saturation 

• Full solid-state busbar replica 

• No switching of CT circuits 

• Only one hardware version for  

- 1 and 5 A rated currents 

- all auxiliary supply voltages between  48 V DC and 250 V DC 

- nominal frequencies of 50, 60 and  16.7 Hz 

• Short tripping times independent of the  plant’s size or configuration 

• Centralized layout: Installation of hardware  in one or several cubicles 

• Distributed layout: Bay units distributed  and, in the case of location close to the  feeders, with short connections to CTs, isolators, circuit breakers, etc. 

• Connections between bay units and central  unit by fiber-optic cables 

- maximum permissible length 1200 m  

- for distributed and centralized layout 

• fiber-optic connections mean interference proof data transfer even close to HV power  cables 

• Replacement of existing busbar protection  schemes can be accomplished without restrictions (centralized layout) in the case of  substation extensions e.g. by a mixture of  centralized and distributed layout 

• Easily extensible