RELIANCE 10VV1/F7252 EMI line filter

RELIANCE 10VV1/F7252 EMI line filter

Basic Information

Brand: RELIANCE

Model：10VVV1/F7252

Type: EMI Line Filter

Function and Application

EMI Filter:

RELIANCE 10VV1/F7252 as an EMI line filter, its main function is to filter out the high frequency noise and electromagnetic interference (EMI) in the power line, so as to protect the equipment from the influence of electromagnetic interference and improve the electromagnetic compatibility and stability of the system.

Application Scenario:

The filter is widely used in a variety of occasions that require electromagnetic protection, such as industrial automation control systems, programmable logic controller (PLC) systems, motor drive systems, medical equipment, military equipment and so on.

Technical specifications and parameters

Supply Voltage:

According to the information provided by different suppliers, the supply voltage of RELIANCE 10VV1/F7252 may be 24V or other standard voltage levels.

Supply Current:

The exact value of the power supply current may vary depending on the actual application and the supplier.

Filter performance:

The filter can effectively filter out electromagnetic interference signals in a specific frequency range, the specific filtering performance and frequency range may vary depending on product design and application requirements.

Other parameters:

It may also include parameters such as weight, size, mounting method, operating ambient temperature, etc. The specific values of these parameters should be confirmed according to the product manual or the information provided by the supplier.

Precautions

Compatibility:

When purchasing and using the RELIANCE 10VV1/F7252 EMI line filter, ensure its compatibility and match with the system to avoid performance degradation or malfunction due to incompatibility.

Installation and Maintenance:

Proper installation should be carried out in accordance with the product manual or the installation guide provided by the supplier, and regular maintenance and inspection should be carried out to ensure the long-term stable operation of the filter.

Safety Norms:

During use, relevant safety norms and operating guidelines should be followed to ensure the safety of personnel and equipment.

Product Parameters and Specifications

Processor: 32-bit RISC processor

Clock frequency: 100 MHz

Memory: 128MB

Flash memory: 256MB

Communication interface: RS-232/485, Ethernet, etc.

Input/output interface: analogue input/output, digital input/output

Operating temperature: -25°C to +60°C

Storage temperature: -40°C to +85°C

Relative humidity: 5% to 95% (non-condensing)

Protection rating: IP65

Product specification: 300mm x 200mm x 100mm

Installation and Maintenance

Environmental conditions:

Ensure that the module is installed within the recommended temperature and humidity ranges and avoid direct exposure to water, oil, dust or electromagnetic interference.

Power Requirements:

Use a stable power supply to avoid damage to the module from voltage fluctuations.

Signal Cable Connection:

Connect the signal lines correctly to ensure the accuracy and stability of signal transmission.

Software Configuration:

Correctly configure the software parameters of the module according to the system requirements to ensure compatibility with other parts of the control system.

Maintenance and Inspection:

Perform regular maintenance and inspection of the module, including cleaning and checking the contact status of the connectors.

Precautions

Operator Training:

Operators should receive proper operation and maintenance training to avoid malfunctions or safety accidents caused by incorrect operation.

Technical Documentation and Safety Guidelines:

The technical documentation and safety guidelines provided by the manufacturer should be read and understood in detail before installation and use.

Compliance with safety procedures:

Observe all relevant safety procedures to ensure personal safety, especially when handling high-pressure or high-speed rotating equipment.