RELIANCE 5136-RE2-PCI Interface Card

RELIANCE 5136-RE2-PCI Interface Card

Product Overview

Brand/Manufacturer: Woodhead (also known as Woodward in some sources)

Model: 5136-RE2-PCI

Use: Used for communication and data exchange between computers and industrial equipment in industrial automation systems.

Technical features

PCI interface: The interface card is designed to be installed in the PCI slot of a computer to achieve high-speed data transmission with the computer system via the PCI bus.

Multi-channel design: It supports parallel processing of multiple input and output signals, which improves the flexibility and expandability of the system.

Multi-function support: capable of processing analogue and digital signals to meet the needs of different industrial automation applications.

High-speed data transmission: Provides high data transmission rate, supports real-time data communication and ensures rapid system response.

Low Latency: Ensures real-time performance and accuracy of industrial control systems.

Software included: software for network communication and remote I/O is included to facilitate user configuration and management.

Application Scope

Process control: Used for data communication of process control systems in chemical, oil and gas, power generation and other industries.

Automation equipment: Connecting and controlling automation equipment such as PLC (e.g. Reliance AutoMax PLC), sensors, actuators, etc. for efficient data exchange and control.

Industrial monitoring: In industrial monitoring systems, it is used for real-time data acquisition and monitoring to ensure the visualisation and manageability of the production process.

Hardware Specifications

Compatibility: Compatible with PCI bus, single slot 32-bit PCI bus card.

Dimensions: Height 10.668 cm (4.2 inches), width 17.4625 cm (8.75 inches).

Connectors: Equipped with two rear coaxial (BNC) connectors.

Operating temperature: 0 to 50 degrees Celsius (32 to 122 degrees Fahrenheit).

Storage temperature: -40 to 85 degrees Celsius (-40 to 185 degrees Fahrenheit).

Humidity: 5% to 95% non-condensing.

Power requirements: +5V 545 mA (typical), powered from PCI slot.

Additional Features

Network Communications: Allows PCI computers to operate as airdrop devices on Reliance DCS-NET or remote I/O networks, exchanging data directly with the AutoMax control system.

System Programming: Supports on-line programming functions for system start-up, commissioning, diagnostics, and operator interface and HMI setup.

Product Parameters

Processor: 32-bit RISC processor

Clock frequency: 100 MHz

Memory: 128MB

Flash memory: 256MB

Communication interface: RS-232/485, Ethernet, etc.

Input/output interface: analogue input/output, digital input/output

Operating temperature: -25°C to +60°C

Storage temperature: -40°C to +85°C

Relative humidity: 5% to 95% (non-condensing)

Protection rating: IP65

Product specification: 300mm x 200mm x 100mm

Installation and Maintenance

Environmental conditions:

Ensure that the module is installed within the recommended temperature and humidity ranges and avoid direct exposure to water, oil, dust or electromagnetic interference.

Power Requirements:

Use a stable power supply to avoid damage to the module from voltage fluctuations.

Signal Cable Connection:

Connect the signal lines correctly to ensure the accuracy and stability of signal transmission.

Software Configuration:

Correctly configure the software parameters of the module according to the system requirements to ensure compatibility with other parts of the control system.

Maintenance and Inspection:

Perform regular maintenance and inspection of the module, including cleaning and checking the contact status of the connectors.

Precautions

Operator Training:

Operators should receive proper operation and maintenance training to avoid malfunctions or safety accidents caused by incorrect operation.

Technical Documentation and Safety Guidelines:

The technical documentation and safety guidelines provided by the manufacturer should be read and understood in detail before installation and use.

Compliance with safety procedures:

Observe all relevant safety procedures to ensure personal safety, especially when handling high-pressure or high-speed rotating equipment.