RELIANCE 57C332A 10-Slot Rack

RELIANCE 57C332A  10-Slot Rack

ABOUT THE 57C332A

The 57C332 is a Rack Assembly made by Reliance Electric. This rack may have also been in production under the names Asea Brown Boveri and Reliance Electric. This rack is no longer being supported by the original manufacturers. AX Control does try to keep this part in stock though. Please see our website for the availability of this rack assembly.

Basic Information

Product Name: RELIANCE 57C332A 10-Slot Rack

Brand：RELIANCE (Reliance Electric)

Manufacturer: Reliance Electric

Series: AutoMax PLC

Technical Features

Number of slots: The rack has 10 slots, allowing the installation of many types of cards and modules to meet different industrial automation needs.

Component Configuration: The rack is equipped with cable management bays, high-capacity cooling fans and AC line filters to ensure stable system operation.

Installation: This is a panel mounting system, which is convenient for users to install and configure according to actual needs.

Power supply: If the power module is installed, the rack will provide enough power for all cards connected to it.

Module Installation Restrictions

Power Supply Module: The power supply module should be placed on the left side of the rack.

Memory Module: If more than one processor is installed, the general-purpose memory module can only be located in slot 0. If there is only one processor, then the memory module can be placed in an even numbered slot.

Processor Modules: Processor modules can only be inserted in slots 0-4.

Primary Uses

Provide secure enclosure locations for AutoMax components.

Used as a remote I/O enclosure.

Application Scenarios

The RELIANCE 57C332A 10-Slot Rack is suitable for a variety of industrial automation scenarios, such as production line control, equipment monitoring and data acquisition. It can be used with AutoMax control system to provide stable and reliable hardware support for industrial automation systems.

Product Parameters and Specifications

Processor: 32-bit RISC processor

Clock frequency: 100 MHz

Memory: 128MB

Flash memory: 256MB

Communication interface: RS-232/485, Ethernet, etc.

Input/output interface: analogue input/output, digital input/output

Operating temperature: -25°C to +60°C

Storage temperature: -40°C to +85°C

Relative humidity: 5% to 95% (non-condensing)

Protection rating: IP65

Product specification: 300mm x 200mm x 100mm

Installation and Maintenance

Environmental conditions:

Ensure that the module is installed within the recommended temperature and humidity ranges and avoid direct exposure to water, oil, dust or electromagnetic interference.

Power Requirements:

Use a stable power supply to avoid damage to the module from voltage fluctuations.

Signal Cable Connection:

Connect the signal lines correctly to ensure the accuracy and stability of signal transmission.

Software Configuration:

Correctly configure the software parameters of the module according to the system requirements to ensure compatibility with other parts of the control system.

Maintenance and Inspection:

Perform regular maintenance and inspection of the module, including cleaning and checking the contact status of the connectors.

Precautions

Operator Training:

Operators should receive proper operation and maintenance training to avoid malfunctions or safety accidents caused by incorrect operation.

Technical Documentation and Safety Guidelines:

The technical documentation and safety guidelines provided by the manufacturer should be read and understood in detail before installation and use.

Compliance with safety procedures:

Observe all relevant safety procedures to ensure personal safety, especially when handling high-pressure or high-speed rotating equipment.