SEDA36AT0100 | General Electric Molded Case Circuit Breaker

SEDA36AT0100 | General Electric Molded Case Circuit Breaker

Product Description P/N: SEDA36AT0100 DESCRIPTION / SPECIFICATIONS Description The SEDA36AT0100 is a General Electric molded case circuit breaker from the Spectra Series. It belongs to the type SEDA and features 3 poles, suitable for three-phase applications. With a current rating of 100A and a voltage rating of 600V, it provides a standard interrupting capacity of 18kA at 480V. This bolt-on circuit breaker is designed for reverse fed applications and is UL listed for safety compliance. 

 Technical Specifications Part Number SEDA36AT0100 Manufacturer General Electric Family Spectra Series Pole 3 Amp 100 Volt 600 Phase 3 Category Molded Case / 3-Pole Connection Bolt-On Type SEDA Protection Solid State AIC Ratings 18kA@480V Information About SEDA36AT0100 The SEDA36AT0100 is a molded case circuit breaker manufactured by General Electric as part of their Spectra Series. It is characterized by its specifications: 3 poles (3P), operating at a three-phase (3PH) system with an amperage rating of 100A. The breaker is designed for a voltage of 600V and offers an interrupting capacity of 18kA at 480V, meeting standard interrupting capacity requirements. Featuring a bolt-on connection type, the SEDA36AT0100 is suitable for reverse fed applications. It is UL listed, ensuring compliance with safety standards. This circuit breaker comes complete with an interchangeable RMS trip unit, featuring Long-Time (LSI), Short-Time, and Instantaneous trip functions. Notably, lugs are not included with this model. 

 Designed with solid-state electronic components, the SEDA36AT0100 ensures reliable operation in diverse electrical environments. As part of General Electric's Spectra Series, it is engineered to provide robust performance and durability, meeting the demanding requirements of industrial and commercial settings. Manufacturer information General Electric (GE) is a multinational conglomerate founded in 1892, based in the United States. It operates in various industries, including aviation, healthcare, renewable energy, and power. GE is known for its innovations in technology, manufacturing, and infrastructure solutions. 

 IQElectro is not an authorized distributor. QElectro LLC (IQElectro) is NOT an Authorized Distributor or in any way affiliated with Rockwell Automation, Siemens, or any other Manufacturers. IQElectro is NOT an Authorized Dealer of this product. The product may be of older version, date codes, or design than that available from authorized dealers. As IQElectro is not an authorized dealer of this product, the Original Manufacturer's Warranty and Support DO NOT apply.IQElectro sells SURPLUS onlyand DOES NOT SELL SOFTWARE or FIRMWARE licenses For more detailed information, please refer to the full version of our disclaimer policy Disclaimer Policy.

Features 

 Single-Slot Module 

 SNP/SNP-X Protocol (master, slave) 

 CCM Protocol (master, slave, peer) 

 RTU Modbus Protocol (slave only) 

 Supports connection to MS-DOS or Windows

 programming and configuration software package (monitor only) 

 12 Mhz, 80C186 Microprocessor 

 Two RS-422/RS-485 or RS-232 Serial Ports 

 CCM, RTU and SNP/SNP-X Available on Either or Both Ports 

 Simultaneous Communications on Both Ports (up to 9.6 Kbps, or 19.2 Kbps individually) 

 High Performance Access to PLC Memory 

 Three Status LEDs 

 Reset pushbutton 

 Soft Switch Configuration (no switches or jumpers) 

 No Battery Required