SKLA36AT0800 | General Electric 3 Pole Circuit Breaker

SKLA36AT0800 | General Electric 3 Pole Circuit Breaker

Product Description P/N: SKLA36AT0800 Description / Specifications Description General Electric SKLA36AT0800 is a 3-pole circuit breaker from the Spectra Series, type SKLA. It is rated at 800A and 600V, with a high interrupting capacity of 65kA@480V. This current-limiting, bolt-on circuit breaker is suitable for reverse fed applications and is UL listed. It includes an interchangeable RMS trip unit with LSI (Long-Time, Short-Time, and Instantaneous) trip functions. 

The circuit breaker is solid-state electronic and molded case, with lugs not included. Technical Specifications Part # SKLA36AT0800 Category Circuit Breaker Subcategory Molded Case Circuit Breaker Frame Type SK1200 120 Vac Interrupting Rating 100 KAIC 120/240 Vac Interrupting Rating 100 KAIC 240 Vac Interrupting Rating 100 KAIC 277 Vac Interrupting Rating 65 KAIC 480 Vac Interrupting Rating 65 KAIC 600 Vac Interrupting Rating 42 KAIC Trip Function LSI Continuous Current Rated Standard Suitable for Reverse Feed Yes Lugs TCAL81 Long Time Fixed Short Time Adjustable Instantaneous Adjustable Current Metering No Protective Relays No Special Markings HACR GSA Compliance No Information About SKLA36AT0800 

 The General Electric SKLA36AT0800 is a three-pole circuit breaker designed for use in industrial and commercial electrical systems. Part of the Spectra Series, it is characterized by its high interrupting capacity and current-limiting capabilities. This circuit breaker is rated for 800A and has a maximum voltage rating of 600V. With an impressive interrupting capacity of 65kA at 480V, it can effectively handle high levels of fault current. Featuring a bolt-on design, the SKLA36AT0800 is suitable for reverse fed applications, providing flexibility in various installation scenarios. It is UL listed, ensuring compliance with safety standards and regulations. One of the key features of this circuit breaker is its interchangeable RMS trip unit, which includes Long-Time, Short-Time, and Instantaneous trip functions. This allows for precise and customizable protection against overloads and short circuits. 

 Manufacturer information General Electric (GE) is a multinational conglomerate founded in 1892, based in the United States. It operates in various industries, including aviation, healthcare, renewable energy, and power. GE is known for its innovations in technology, manufacturing, and infrastructure solutions. IQElectro is not an authorized distributor. QElectro LLC (IQElectro) is NOT an Authorized Distributor or in any way affiliated with Rockwell Automation, Siemens, or any other Manufacturers. IQElectro is NOT an Authorized Dealer of this product. The product may be of older version, date codes, or design than that available from authorized dealers. As IQElectro is not an authorized dealer of this product, the Original Manufacturer's Warranty and Support DO NOT apply.IQElectro sells SURPLUS onlyand DOES NOT SELL SOFTWARE or FIRMWARE licenses For more detailed information, please refer to the full version of our disclaimer policy Disclaimer Policy.

Features 

 Single-Slot Module 

 SNP/SNP-X Protocol (master, slave) 

 CCM Protocol (master, slave, peer) 

 RTU Modbus Protocol (slave only) 

 Supports connection to MS-DOS or Windows

 programming and configuration software package (monitor only) 

 12 Mhz, 80C186 Microprocessor 

 Two RS-422/RS-485 or RS-232 Serial Ports 

 CCM, RTU and SNP/SNP-X Available on Either or Both Ports 

 Simultaneous Communications on Both Ports (up to 9.6 Kbps, or 19.2 Kbps individually) 

 High Performance Access to PLC Memory 

 Three Status LEDs 

 Reset pushbutton 

 Soft Switch Configuration (no switches or jumpers) 

 No Battery Required