GE SR750 P5-G5-S5-HI-A20-R; Manufacturer GE-FANUC

GE SR750  P5-G5-S5-HI-A20-R; Manufacturer GE-FANUC

Type:Modular Control System Module Type:SR750 Model:P5-G5-S5-HI-A20-R Brand:GE-FANUC Operating Voltage:220 V Output Frequency:50 kHz Certification:Certified Product Series:SR750 Material Coding:SR750-P5-G5-S5-HI-A20-RT Communications:Modbus RTU or DNP 3.0 Baud Rate:300 to 19200 baud Frequency Range:25 to 60 Hz nominal Relay Dimensions:Approx. 18 cm W x 16.5 cm L x 21.5 cm H Overvoltage Pickup Level:0 to 1.25 脳 VT in steps of 0.01 Insulation Voltage:300 V Waveform Capture:Channels for 4 currents, 3 voltages, 14 logic input states, and 8 output relays Environmental:Up to 90% non-condensing humidity Pollution Degree:II Innovative design allows for seamless integration with a wide range of industrial systems, enhancing operational efficiency and reliability. 

 Equipped with advanced monitoring capabilities, providing real-time feedback on power usage and system performance. Built with high-quality materials ensuring durability and long-lasting service life, making it a robust choice for demanding environments. Supports a variety of protective features including overcurrent, under/overfrequency, and ground fault protection, ensuring system safety and uptime. Easy-to-use configuration options through intuitive software interface, simplifying setup and maintenance procedures for operators. The GE SR750 750-P5-G5-S5-HI-A20-R is a robust industrial control module designed for high-performance applications. This compact yet powerful unit is engineered to provide precise control and monitoring in demanding environments. 

Benefits

 Single slot CPU 

 Provides 1 Mbyte of battery-backed memory in the same slot (up to 512 Kbytes available for use by ladder diagram application program)  Supports floating point calculations 

 Up to 12K discrete inputs and outputs (any mix - simplex mode only); 2048 voted discrete inputs, 2048 voted discrete outputs Up to 8K analog inputs (simplex mode only) and 8K analog outputs (simplex mode only); 1024 voted analog inputs 

 0.4 microseconds per boolean function 

 64 MHz, 80486DX2 microprocessor 

 Supports IC660/IC661 I/O (and IC697 I/O in simplex mode only) 

 Programmed by MS-DOS

, or Windows

 software products running on Windows

 95 or Windows NT

 over Ethernet TCP/IP or through the SNP port. 

 Configurable data and program memory 

 Battery-backed calendar clock 

 Three position operation mode switch 

 Password controlled access 

 Remote programmer keyswitch memory protection 

 Four status LEDs 

 Software configuration (No DIP switches or jumpers) 

 Reference information inside front door 

 In-system upgradable firmware