GE Fanuc IS200VTURH1BAC | High-Precision Mark VI Circuit Board for Advanced Control Systems

GE Fanuc IS200VTURH1BAC | High-Precision Mark VI Circuit Board for Advanced Control Systems

Model:IS200VTURH1BAC Series:Mark VI Manufacturer:GE-FANUC Functional Acronym/Abbreviation:VTUR Model Type:Protection Board Supported Features:[ rimary Turbine Protection  RPG, TRPL, TREG, TRPS MPU Pulse Rate Range:2 Hz to 20 kHz MPU Pulse Rate Accuracy:0.05% of Reading Number of Trip Solenoids:3 Contact Voltage Sensing:[ 0 V dc for HI   V dc for LO Board Classification:GE Boards & Turbine Control Engineered for superior performance and durability, the GE Fanuc IS200VTURH1BAC is a core component in advanced control systems, offering unparalleled reliability and precision. Designed with state-of-the-art technology, this circuit board is compatible with the latest Mark VI systems, ensuring compatibility and seamless integration. 

 The VTUR acronym stands for Variable Turbine Rate Governor, highlighting its role in managing turbine operations efficiently. Its high accuracy pulse rate capability ensures precise control over industrial processes. Featuring robust contact voltage sensing mechanisms, the IS200VTURH1BAC provides enhanced safety and operational reliability, minimizing downtime and maintenance needs. Crafted from high-quality materials, this circuit board withstands extreme environmental conditions, making it suitable for use in demanding industrial settings. Its efficient heat dissipation design ensures stable performance over long periods. Engineered for precision and reliability, the GE Fanuc IS200VTURH1BAC Mark VI Circuit Board is an advanced control module designed for critical industrial applications, ensuring optimal performance and safety. 

Compatibility 

ƒ Compatible with any Series 90-30 CPU except IC693CPU321 and IC693CPU340. Configuration size is limited for CPU311/313/331, as described on the next page. 

ƒ Requires release 8.0 CPU firmware. The latest Release 10 is recommended, if available for the particular CPU. 

ƒ Requires CIMPLICITY Machine Edition Logic Developer PLC version 3.0 plus the appropriate service pack or special (or a version later than 3.0). 

ƒ Not compatible with the VersaPro™, Control, or Logicmaster™ programming software. 

ƒ The Series 90-30 Hand-Held Programmer (IC693PRG300) cannot be used to configure this module. New Features The Series 90-30 DeviceNet Master Module allows a Series 90-30 PLC to send and receive I/O data from a DeviceNet network. 

Module features include: 

ƒ Support for all standard data rates (125K, 250K, 500K) 

ƒ Support for 255 bytes input data transfer and 255 bytes output data transfer per slave 

ƒ Support for 3972 bytes of input data transfer and 3972 bytes of output data transfer per master 

ƒ Support for two I/O connections per Slave - Typically one connection is used for Polled and the other is used for Strobe, Cyclic, or COS 

ƒ Support for Poll, Strobe, Cyclic and COS I/O Connections, Fragmented I/O and Explicit Messaging 

ƒ Support for Unconnected Message Manager (UCMM) with 1 proxy connection per slave device 

ƒ Support for configuration of the global scan rate 

ƒ Support for configuration of update rates for Poll and COS/Cyclic on a connection basis 

ƒ Support for PLC-application initiated explicit messaging via a COMMREQ 

ƒ Master can be configured to operate as a slave simultaneously with master operation 

ƒ Configurable fault behavior on loss of communication 

ƒ Reports loss or reestablishment of communication with slaves in PLC fault table (configurable) 

ƒ Support for 64 network device status bits (note: the bit for the master itself is always zero) 

ƒ Firmware update via service port on module