TCAL18 | General Electric Lug Terminal

TCAL18 | General Electric Lug Terminal

Product Description P/N: TCAL18 Description / Specifications Description The TCAL18 is a lug terminal kit produced by General Electric as part of the TCAL Series. It is designed to accommodate a single lug with one barrel, supporting wire sizes ranging from #12 to 168 MCM for both copper and aluminum conductors. Technical Specifications Brand General Electric Category Circuit Breaker Part Number TCAL18 Subcategory Circuit Breaker Accessory Family TCAL Series Type TCAL MCM Size 168 Barrels 1 Metal Type Aluminum Suit Frame SEDA,SEHA,SELA,SEPA Information About TCAL18 

 The TCAL18 is a lug terminal manufactured by General Electric under the TCAL Series. It is designed to facilitate robust electrical connections within specified SE150 line molded case circuit breakers, including frames SEDA, SEHA, SELA, and SEPA. This lug terminal kit supports a single lug with one barrel, accommodating wire sizes ranging from #12 to 168 MCM (thousand circular mils) for both aluminum conductors. Constructed from aluminum, the TCAL18 ensures conductivity and durability suitable for various electrical applications. It is field installable, allowing flexibility in installation processes while maintaining secure connections. This terminal kit is engineered to meet rigorous electrical standards and provides a reliable interface between conductors and circuit breakers, ensuring efficient electrical distribution and enhancing system reliability. 

 Manufacturer information General Electric (GE) is a multinational conglomerate founded in 1892, based in the United States. It operates in various industries, including aviation, healthcare, renewable energy, and power. GE is known for its innovations in technology, manufacturing, and infrastructure solutions. IQElectro is not an authorized distributor. QElectro LLC (IQElectro) is NOT an Authorized Distributor or in any way affiliated with Rockwell Automation, Siemens, or any other Manufacturers. IQElectro is NOT an Authorized Dealer of this product. The product may be of older version, date codes, or design than that available from authorized dealers. As IQElectro is not an authorized dealer of this product, the Original Manufacturer's Warranty and Support DO NOT apply.IQElectro sells SURPLUS onlyand DOES NOT SELL SOFTWARE or FIRMWARE licenses For more detailed information, please refer to the full version of our disclaimer policy Disclaimer Policy.

OTHER INFORMATION

• Up to 1.26 GHz Pentium® III processor with 256 KB advanced  transfer cache  

• Up to 512 MB PC-133 SDRAM using a single SODIMM  

• Internal AGP SVGA controller with 4 MB display cache  

• 133 MHz system bus via Intel® 815E chipset  

• Dual Ethernet controllers supporting 10BaseT and 100BaseTX  interfaces  

• Optional PCI dual channel Ultra160 SCSI  

• Up to three (two with rear I/O support) PMC expansion sites  (IEEE-P1386 common mezzanine card standard, 5 V)  

• Up to 1 GB bootable flash on secondary IDE (optional)  

• Two 16-bit and two 32-bit programmable timers  

• 32 KB of nonvolatile SRAM  

• Software-selectable watchdog timer with reset  

• Remote Ethernet booting  

• Optional IDE hard disk drive  

• VME64 modes supported:  A32/A24/D32/D16/D08(EO)/MBLT64/BLT32  

• VMEbus interrupt handler, interrupter and system controller  

• Includes real time endian conversion hardware for littleendian and big-endian data interfacing (patent no. 6,032,212)  

• Enhanced bus error handling  

• Passive heat sink