GE TCLK365 | General Electric Lug Terminal Kit

GE TCLK365 | General Electric Lug Terminal Kit

Product Description P/N: 531X132APGACG1 DESCRIPTION / SPECIFICATIONS Description The General Electric 531X132APGACG1 is a sophisticated Application Card Industrial Board, providing advanced functionalities for precise control and optimization in industrial systems, ensuring enhanced performance and adaptability. Technical Specifications Brand General Electric Category Drives Part Number 531X132APGACG1 Subcategory Drive Type APPLICATION CARD Information About 531X132APGACG1 The 531X132APGACG1 is an Application card. 

This Application card is produced by General Electric. General Electric has been a leader in the electrical world since the 1800s. In 1876 Thomas Edison created his own laboratory. In 1879 Thomas-Hudson Electric Company was formed. These two companies merged in 1892 to create General Electric Company. The 531X132APGACG1 is now considered an out of date technology. The 531X132APGACG1 also has a combination of components such as diodes which direct energy flow much like a one-way street, male terminals that allow communication and power distribution between circuit boards with a wiring harness, and Variable Resistors that control the amount of energy passing through them. 

The 531X132APGACG1 has one-hundred and fourteen resistors. The resistors purpose is to convert unneeded energy into heat and release it. The 531X132APGACG1 has twenty-six Integrated Circuits. The Integrated Circuits are small enclosed circuit boards used to house information programming to tell the circuit board its purpose. The 531X132APGACG1 has nine thin yellow capacitors and over eighty-five other types of capacitors. 

 Manufacturer information General Electric (GE) is a multinational conglomerate founded in 1892, based in the United States. It operates in various industries, including aviation, healthcare, renewable energy, and power. GE is known for its innovations in technology, manufacturing, and infrastructure solutions. IQElectro is not an authorized distributor. QElectro LLC (IQElectro) is NOT an Authorized Distributor or in any way affiliated with Rockwell Automation, Siemens, or any other Manufacturers. IQElectro is NOT an Authorized Dealer of this product. The product may be of older version, date codes, or design than that available from authorized dealers. As IQElectro is not an authorized dealer of this product, the Original Manufacturer's Warranty and Support DO NOT apply.IQElectro sells SURPLUS onlyand DOES NOT SELL SOFTWARE or FIRMWARE licenses For more detailed information, please refer to the full version of our disclaimer policy Disclaimer Policy.

OTHER INFORMATION

• Celeron™ socket 370-based single-board computer (SBC) with operating  system support for Windows NT®/Windows® 2000, Linux, VxWorks, QNX,  and Solaris 

• Special features for embedded applications 

— Up to 512 Mbyte IDE CompactFlash (optional) 

— Three programmable 16-bit timers 

— 32 Kbyte of battery-backed SRAM 

— Remote Ethernet booting supported 

— Software-selectable watchdog timer with reset 

— Supports VMEbus P2 connection to HD/floppy drive 

— PMC expansion site with VMEbus P2 I/O 

— PC•MIP expansion site supported 

— VME64 modes supported: A32/A24/D32/D16/D08(EO)/MBLT64/BLT32 

— VMEbus interrupt handler, interrupter, and system controller 

— Includes byte-swapping hardware for little-endian and big-endian data  interfacing (patent no. 6,032,212) 

— Enhanced bus error handling 

— Passive heat sink design (no moving parts) 

• Standard features include 

— Celeron socket 370 processor 

— Up to 256 Mbyte SDRAM using one 144-pin SODIMM 

— 64-bit Intel® AGP SVGA controller with 2 Mbyte SGRAM 

— On-board Fast Ethernet controller supporting 10BaseT and 100BaseTX  interfaces 

— On-board Ultra DMA/33 hard drive and floppy drive controllers with  VMEbus P2 I/O 

— Two high-performance 16550-compatible serial ports 

— PS/2-style keyboard and mouse port on front panel 

— Real-time clock and miniature speaker included