GE THQB1120GFT | General Electric 20 Amp GFCI Circuit Breaker

GE THQB1120GFT | General Electric 20 Amp GFCI Circuit Breaker

Product Description P/N: 531X111PSHARG2 DESCRIPTION / SPECIFICATIONS Description The General Electric 531X111PSHARG2 is a Motor Field Control and Power Supply Board from the 531X Series, delivering precise control and reliable power to enhance motor performance in industrial applications. 

 Technical Specifications Brand General Electric Category Power Supplies Part Number 531X111PSHARG2 Subcategory Power Supply Information About 531X111PSHARG2 The General Electric 531X111PSHARG2 card is a motor field control and power supply board. When developed, this card was made for the 531X series of replacement boards. Any number of drives and exciters manufactured by GE can have this card installed in its cabinet. This power supply board provides the power supply required by the drive to operate. It also contains the proper equipment to power the board motor field circuitry. 

As a G2 revision of the board, this card is developed for use with an external exciters. 531X111PSHARG2 provides the drive with the necessary power supplies needed to properly operate. Supplies rated at 5 VDC, 15 VDC, and 24 VDC can all be produced by the card. Motor field circuitry found on the drive are powered by the card integrated pulse transformer. The card contains three relays, RUN (K1), MAX (K2), and FAULT (K3) to provide system control options. Three potentiometers are also integrated onto the board. P1 (FIELD SCALE), P2 (CFB ZERO), and P3 (CFB ADJUST) all allow users to calibrate or adjust circuits or current feedbacks. Five configurable jumpers allow users to select and adjust feedback and current signals. 

 When installing the card, be sure to follow all provided installation parameters. Any guidelines provided by the manufacturer should be met to protect device integrity. Only allow trained personnel qualified to handle drive boards to install this card. A complete wiring and installation guide for the 531X111PSHARG2 board is available in the devicenual and datasheet. Technical support for this power supply board was originally provided by the device manufacturer, 

General Electric. Manufacturer information General Electric (GE) is a multinational conglomerate founded in 1892, based in the United States. It operates in various industries, including aviation, healthcare, renewable energy, and power. GE is known for its innovations in technology, manufacturing, and infrastructure solutions. IQElectro is not an authorized distributor. QElectro LLC (IQElectro) is NOT an Authorized Distributor or in any way affiliated with Rockwell Automation, Siemens, or any other Manufacturers. IQElectro is NOT an Authorized Dealer of this product. The product may be of older version, date codes, or design than that available from authorized dealers. As IQElectro is not an authorized dealer of this product, the Original Manufacturer's Warranty and Support DO NOT apply.IQElectro sells SURPLUS onlyand DOES NOT SELL SOFTWARE or FIRMWARE licenses For more detailed information, please refer to the full version of our disclaimer policy Disclaimer Policy.

Benefits

 Single slot CPU 

 Provides 1 Mbyte of battery-backed memory in the same slot (up to 512 Kbytes available for use by ladder diagram application program)  Supports floating point calculations 

 Up to 12K discrete inputs and outputs (any mix - simplex mode only); 2048 voted discrete inputs, 2048 voted discrete outputs Up to 8K analog inputs (simplex mode only) and 8K analog outputs (simplex mode only); 1024 voted analog inputs 

 0.4 microseconds per boolean function 

 64 MHz, 80486DX2 microprocessor 

 Supports IC660/IC661 I/O (and IC697 I/O in simplex mode only) 

 Programmed by MS-DOS

, or Windows

 software products running on Windows

 95 or Windows NT

 over Ethernet TCP/IP or through the SNP port. 

 Configurable data and program memory 

 Battery-backed calendar clock 

 Three position operation mode switch 

 Password controlled access 

 Remote programmer keyswitch memory protection 

 Four status LEDs 

 Software configuration (No DIP switches or jumpers) 

 Reference information inside front door 

 In-system upgradable firmware