TED124030 | General Electric Molded Case Circuit Breaker

TED124030 | General Electric Molded Case Circuit Breaker

Product Description P/N: TED124030 Description / Specifications Description The TED124030 is a molded case circuit breaker manufactured by General Electric under the E150 Line series, identified as type TED. It is designed for single-phase systems, featuring a 2-pole configuration with a current rating of 30 amps and an operational voltage of 480 volts AC. The breaker is equipped with line and load side lug terminals for secure electrical connections and operates with a thermal magnetic trip mechanism. 

 Technical Specifications Part Number TED124030WL Manufacturer General Electric Family E150 Line Pole 2 Amp 30 Volt 480 Phase 1 Category Molded Case / 2-Pole Connection Feed-Thru Type TED Functions LI - Long-Time and Instantaneous Protection Thermal Magnetic AIC Ratings 18kA@480V Information About TED124030 The TED124030 molded case circuit breaker manufactured by General Electric belongs to the E150 Line series and is designated as type TED. It is specifically engineered for single-phase electrical systems, featuring a 2-pole configuration capable of handling up to 30 amps at 480 volts AC. This breaker is equipped with line and load side lug terminals to facilitate secure electrical connections. 

 Key specifications include an interrupting capacity of 18,000 amperes at 480 volts AC, ensuring effective protection against overcurrents and short circuits. The TED124030 utilizes a thermal magnetic trip mechanism, combining thermal protection to guard against sustained overloads and magnetic protection to swiftly interrupt fault currents. Designed for versatile applications, the TED124030 is suitable for feed-thru installations, accommodating the passage of electrical power through the breaker to downstream circuits without interruption. It operates reliably within ambient temperatures up to 40 degrees Celsius, making it suitable for diverse industrial and commercial environments where robust circuit protection is essential. Manufacturer information General Electric (GE) is a multinational conglomerate founded in 1892, based in the United States. 

It operates in various industries, including aviation, healthcare, renewable energy, and power. GE is known for its innovations in technology, manufacturing, and infrastructure solutions. IQElectro is not an authorized distributor. QElectro LLC (IQElectro) is NOT an Authorized Distributor or in any way affiliated with Rockwell Automation, Siemens, or any other Manufacturers. IQElectro is NOT an Authorized Dealer of this product. The product may be of older version, date codes, or design than that available from authorized dealers. As IQElectro is not an authorized dealer of this product, the Original Manufacturer's Warranty and Support DO NOT apply.IQElectro sells SURPLUS onlyand DOES NOT SELL SOFTWARE or FIRMWARE licenses For more detailed information, please refer to the full version of our disclaimer policy Disclaimer Policy.

OTHER INFORMATION

• Up to 1.26 GHz Pentium® III processor with 256 KB advanced  transfer cache  

• Up to 512 MB PC-133 SDRAM using a single SODIMM  

• Internal AGP SVGA controller with 4 MB display cache  

• 133 MHz system bus via Intel® 815E chipset  

• Dual Ethernet controllers supporting 10BaseT and 100BaseTX  interfaces  

• Optional PCI dual channel Ultra160 SCSI  

• Up to three (two with rear I/O support) PMC expansion sites  (IEEE-P1386 common mezzanine card standard, 5 V)  

• Up to 1 GB bootable flash on secondary IDE (optional)  

• Two 16-bit and two 32-bit programmable timers  

• 32 KB of nonvolatile SRAM  

• Software-selectable watchdog timer with reset  

• Remote Ethernet booting  

• Optional IDE hard disk drive  

• VME64 modes supported:  A32/A24/D32/D16/D08(EO)/MBLT64/BLT32  

• VMEbus interrupt handler, interrupter and system controller  

• Includes real time endian conversion hardware for littleendian and big-endian data interfacing (patent no. 6,032,212)  

• Enhanced bus error handling  

• Passive heat sink