ABB TET106 11355-0-6050000 Isolation amplifier module

ABB TET106 11355-0-6050000 Isolation amplifier module

Product core positioning

ABB TET106 11355-0-6050000 is a high-precision industrial grade isolation amplifier module, belonging to ABB's industrial automation signal processing product line. Its core positioning is the "signal isolation and precision transmission bridge" in industrial control systems. Its main function is to electrically isolate, amplify, and linearly convert the analog signals (such as voltage and current signals) output by on-site sensors and transmitters, effectively eliminating common mode interference and grounding loop interference between different devices. It transmits pure standard signals to upper level devices such as PLC, DCS, and data acquisition systems (DAQ) to ensure the accuracy of industrial data acquisition and the safety of system operation. It is widely used in process control, energy monitoring, intelligent manufacturing, and other scenarios that require strict signal stability.

Key technical specifications

1. Electrical core parameters

Signal input and output characteristics: Supports multiple analog signal inputs, common adaptation input types include 0-10V DC voltage signal, 4-20mA DC current signal, and some scenarios can be compatible with mV level weak signals; The output signal is a standard industrial signal, usually 4-20mA DC or 0-10V DC, with an output accuracy error of ≤± 0.1% FS (full range) to ensure the accuracy of signal transmission.

Isolation performance: With enhanced electrical isolation capability, the isolation voltage between input, output and power supply is ≥ 2500V AC (1-minute withstand voltage test), and the common mode rejection ratio (CMRR) is ≥ 120dB@50 /60Hz， It can effectively block strong interference signals in industrial sites and protect subsequent control systems from damage.

Power characteristics: Adopting a wide range DC power supply, compatible with 24V DC (common industrial standard), the allowable fluctuation range of power supply voltage is ± 10%, and the power consumption is as low as 1.5W. It is suitable for multi module centralized power supply scenarios in industrial control cabinets, reducing overall energy consumption.

Response speed: The signal conversion response time is ≤ 1ms, which can quickly track the dynamic changes of the input signal and meet the real-time signal requirements of high-speed industrial process control.

2. Physical and environmental parameters

Dimensions: Adopting a compact design, the typical dimensions are approximately 12.5mm (width) x 100mm (height) x 75mm (depth) (specific dimensions subject to actual product), suitable for 35mm standard DIN rail installation, saving installation space inside the control cabinet and facilitating dense layout.

Environmental adaptability: working temperature range -20 ℃~+60 ℃, storage temperature range -40 ℃~+85 ℃; Relative humidity tolerance range of 10%~90% (no condensation); It has certain anti vibration and anti impact capabilities, complies with the IEC 60068-2 series environmental testing standards, and can operate stably in complex industrial environments.

Protection level: The module body has a protection level of IP20, which can effectively prevent dust from entering and is suitable for use in control cabinets or industrial environments with protective measures.

3. Certification and Standards

Compliant with relevant standards of the International Electrotechnical Commission (IEC), including IEC 61010-1 (Safety requirements for measuring, control and laboratory equipment); Through CE certification (compliant with the EU EMC Directive and Low Voltage Directive), UL certification (US safety standards), and some models may also pass CSA certification (Canadian safety standards), ensuring compliant applications in major industrial regions worldwide.

Core functions and design features

1. Signal isolation and interference suppression

Triple isolation design: achieving mutual electrical isolation between input, output, and power supply, fundamentally cutting off the grounding loop, avoiding interference signals from different devices due to potential differences, ensuring the purity of signal transmission, especially suitable for industrial scenarios with multiple devices working together and complex grounding systems (such as chemical workshops and large intelligent manufacturing production lines).

High common mode rejection ratio: By using differential amplification circuits and filtering designs, the common mode rejection capability is greatly improved. Even in the presence of strong electromagnetic interference (such as interference from frequency converters and high-power motors) in industrial sites, the stability of the output signal can still be ensured, reducing data acquisition errors.

2. Signal conditioning and precise transmission

Wide range signal adaptation: It can flexibly adapt to different types and ranges of input signals. Through internal parameter configuration (some models support software configuration or hardware dialing settings), it can meet the signal processing needs of various sensors without replacing modules, improve equipment versatility, and reduce selection and inventory costs.

High precision signal amplification: Using low drift, high linearity operational amplifiers and ADC/DAC chips, precise amplification and linear conversion of weak input signals are carried out to ensure strict linear relationship between output signals and input signals, with errors controlled within an extremely low range, providing reliable data support for precise control of subsequent control systems.

3. Security protection and operational convenience

Overcurrent and overvoltage protection: The input port integrates overcurrent protection circuit and overvoltage clamp circuit. When the input signal exceeds the rated range (such as sensor failure causing signal abnormality), it can quickly limit the current and voltage, prevent damage to internal components of the module, and prevent abnormal signals from being transmitted to the upper equipment, playing a dual protection role.

Status indication and diagnosis: The module panel is equipped with a power indicator light (Power), a signal normal indicator light (Signal OK), and some models also have a fault alarm indicator light (Fault), which can intuitively feedback the working status of the module; Some advanced models support communication with the upper system through HART protocol or Modbus protocol, enabling module working parameter monitoring, fault diagnosis, and remote configuration, simplifying operation and maintenance processes, and shortening troubleshooting time.

Hot swappable support (some models): Some versions of TET106 modules support hot swappable functionality, which allows for module replacement and maintenance without shutting down the system, reducing production downtime caused by equipment maintenance and improving the continuous operation capability of industrial systems.