THQL1120GFT | General Electric 20 Amp GFCI Circuit Breaker

THQL1120GFT | General Electric 20 Amp GFCI Circuit Breaker

Product Description P/N: THQL1120GFT Description / Specifications Description THQL1120GFT, General Electric, type THQL, 1P, 1PH, 20A, 120V, 10kA@120V, UL listed, Plug-In, complete with ground fault circuit interrupters with self-test, LI - Long-Time and Instantaneous trip functions and load side lug terminal, Thermal Magnetic, molded case circuit breaker. Technical Specifications Brand General Electric Category Circuit Breaker Part Number THQL1120GFT Subcategory Load Center Circuit Breaker Family Q-Line Type THQL Voltage 120 Amperage 20 AIC Rating 10kA@120V Protection Thermal Magnetic Poles 1 Phase 1 Functions LI - Long-Time and Instantaneous Connection Plug-In Information About THQL1120GFT 

 The THQL1120GFT by General Electric is a 20 Amp Ground Fault Circuit Interrupter (GFCI) breaker from the Q-Line family, designed for enhanced electrical safety in residential and commercial settings. Operating at 120 volts, this single-pole breaker provides reliable protection against overloads, short circuits, and ground faults. The THQL1120GFT features thermal magnetic protection, combining long-time (LI) and instantaneous (LI) trip functions. This dual mechanism ensures comprehensive protection by addressing both sustained overload conditions and sudden short circuits. Additionally, the GFCI functionality offers enhanced safety by detecting and interrupting ground faults, reducing the risk of electric shock. With an interrupting capacity (AIC) of 10kA at 120V, the THQL1120GFT effectively handles high fault currents, preventing potential damage to the electrical system. 

Its single-phase configuration makes it suitable for a wide range of applications, including residential and light commercial installations. The breaker employs a plug-in connection type, facilitating easy and secure installation in compatible panel boards. This design simplifies the installation process and ensures reliable electrical connections. Overall, the General Electric THQL1120GFT GFCI circuit breaker is a critical component for enhancing the safety and reliability of electrical systems. Its combination of thermal magnetic and ground fault protection, along with ease of installation, makes it a dependable choice for safeguarding against electrical hazards. Manufacturer information General Electric (GE) is a multinational conglomerate founded in 1892, based in the United States. It operates in various industries, including aviation, healthcare, renewable energy, and power. 

GE is known for its innovations in technology, manufacturing, and infrastructure solutions. IQElectro is not an authorized distributor. QElectro LLC (IQElectro) is NOT an Authorized Distributor or in any way affiliated with Rockwell Automation, Siemens, or any other Manufacturers. IQElectro is NOT an Authorized Dealer of this product. The product may be of older version, date codes, or design than that available from authorized dealers. As IQElectro is not an authorized dealer of this product, the Original Manufacturer's Warranty and Support DO NOT apply.IQElectro sells SURPLUS onlyand DOES NOT SELL SOFTWARE or FIRMWARE licenses For more detailed information, please refer to the full version of our disclaimer policy Disclaimer Policy.

Compatibility 

ƒ Compatible with any Series 90-30 CPU except IC693CPU321 and IC693CPU340. Configuration size is limited for CPU311/313/331, as described on the next page. 

ƒ Requires release 8.0 CPU firmware. The latest Release 10 is recommended, if available for the particular CPU. 

ƒ Requires CIMPLICITY Machine Edition Logic Developer PLC version 3.0 plus the appropriate service pack or special (or a version later than 3.0). 

ƒ Not compatible with the VersaPro™, Control, or Logicmaster™ programming software. 

ƒ The Series 90-30 Hand-Held Programmer (IC693PRG300) cannot be used to configure this module. New Features The Series 90-30 DeviceNet Master Module allows a Series 90-30 PLC to send and receive I/O data from a DeviceNet network. 

Module features include: 

ƒ Support for all standard data rates (125K, 250K, 500K) 

ƒ Support for 255 bytes input data transfer and 255 bytes output data transfer per slave 

ƒ Support for 3972 bytes of input data transfer and 3972 bytes of output data transfer per master 

ƒ Support for two I/O connections per Slave - Typically one connection is used for Polled and the other is used for Strobe, Cyclic, or COS 

ƒ Support for Poll, Strobe, Cyclic and COS I/O Connections, Fragmented I/O and Explicit Messaging 

ƒ Support for Unconnected Message Manager (UCMM) with 1 proxy connection per slave device 

ƒ Support for configuration of the global scan rate 

ƒ Support for configuration of update rates for Poll and COS/Cyclic on a connection basis 

ƒ Support for PLC-application initiated explicit messaging via a COMMREQ 

ƒ Master can be configured to operate as a slave simultaneously with master operation 

ƒ Configurable fault behavior on loss of communication 

ƒ Reports loss or reestablishment of communication with slaves in PLC fault table (configurable) 

ƒ Support for 64 network device status bits (note: the bit for the master itself is always zero) 

ƒ Firmware update via service port on module