THQL2130GFT | General Electric 30 Amp Molded Case Circuit Breaker

THQL2130GFT | General Electric 30 Amp Molded Case Circuit Breaker

Product Description P/N: THQL2130GFT DESCRIPTION / SPECIFICATIONS Description The THQL2130GFT is a 2-pole molded case circuit breaker manufactured by General Electric, belonging to the Q-Line series. It is designed for use in electrical systems requiring robust overcurrent protection and is rated at 30A and 240V. This circuit breaker features a plug-in configuration and includes ground fault protection with self-test capability. 

 Technical Specifications Brand GE Type Type THQL Model 3 Self-Test Voltage Rating 120/240 VAC Amperage Rating 30 A Interrupt Rating 10 kA Frame Q-Line Trip Type Non-Interchangeable/LIG Trip Range 5 mA Number Of Poles 2 Phase 1 Wire Size 14 to 8 AWG Cu, 12 to 8 AWG Al Mounting Type Plug-In Dimensions 3-9/32 in H x 2 in W x 2-3/8 in D Information About THQL2130GFT THQL2130GFT is a General Electric Type THQL molded case circuit breaker rated at 30 Amps and designed for 240 Volts AC. It features a 2-pole configuration suitable for single-phase applications. 

This circuit breaker is UL listed and has an interrupting rating of 10,000 Amps at 120 Volts, making it suitable for residential and commercial electrical systems. The THQL2130GFT incorporates thermal magnetic protection technology, providing both Long-Time and Instantaneous trip functions. It is equipped with a ground fault circuit interrupter (GFCI) with a self-test feature, enhancing safety by automatically testing the integrity of the ground fault protection. This model includes load side lug terminals for secure electrical connections. Manufacturer information General Electric (GE) is a multinational conglomerate founded in 1892, based in the United States. It operates in various industries, including aviation, healthcare, renewable energy, and power. 

GE is known for its innovations in technology, manufacturing, and infrastructure solutions. IQElectro is not an authorized distributor. QElectro LLC (IQElectro) is NOT an Authorized Distributor or in any way affiliated with Rockwell Automation, Siemens, or any other Manufacturers. IQElectro is NOT an Authorized Dealer of this product. The product may be of older version, date codes, or design than that available from authorized dealers. As IQElectro is not an authorized dealer of this product, the Original Manufacturer's Warranty and Support DO NOT apply.IQElectro sells SURPLUS onlyand DOES NOT SELL SOFTWARE or FIRMWARE licenses For more detailed information, please refer to the full version of our disclaimer policy Disclaimer Policy.

Compatibility 

ƒ Compatible with any Series 90-30 CPU except IC693CPU321 and IC693CPU340. Configuration size is limited for CPU311/313/331, as described on the next page. 

ƒ Requires release 8.0 CPU firmware. The latest Release 10 is recommended, if available for the particular CPU. 

ƒ Requires CIMPLICITY Machine Edition Logic Developer PLC version 3.0 plus the appropriate service pack or special (or a version later than 3.0). 

ƒ Not compatible with the VersaPro™, Control, or Logicmaster™ programming software. 

ƒ The Series 90-30 Hand-Held Programmer (IC693PRG300) cannot be used to configure this module. New Features The Series 90-30 DeviceNet Master Module allows a Series 90-30 PLC to send and receive I/O data from a DeviceNet network. 

Module features include: 

ƒ Support for all standard data rates (125K, 250K, 500K) 

ƒ Support for 255 bytes input data transfer and 255 bytes output data transfer per slave 

ƒ Support for 3972 bytes of input data transfer and 3972 bytes of output data transfer per master 

ƒ Support for two I/O connections per Slave - Typically one connection is used for Polled and the other is used for Strobe, Cyclic, or COS 

ƒ Support for Poll, Strobe, Cyclic and COS I/O Connections, Fragmented I/O and Explicit Messaging 

ƒ Support for Unconnected Message Manager (UCMM) with 1 proxy connection per slave device 

ƒ Support for configuration of the global scan rate 

ƒ Support for configuration of update rates for Poll and COS/Cyclic on a connection basis 

ƒ Support for PLC-application initiated explicit messaging via a COMMREQ 

ƒ Master can be configured to operate as a slave simultaneously with master operation 

ƒ Configurable fault behavior on loss of communication 

ƒ Reports loss or reestablishment of communication with slaves in PLC fault table (configurable) 

ƒ Support for 64 network device status bits (note: the bit for the master itself is always zero) 

ƒ Firmware update via service port on module