THQLSURGE | General Electric Surge Protector

THQLSURGE | General Electric Surge Protector

Product Description P/N: THQLSURGE Description / Specifications Description The THQLSURGE is a surge protector manufactured by GE, designed to safeguard sensitive electronic equipment. Featuring LED confirmation and straightforward plug-in installation, it offers ease of use and reliability. Designed for service entrance or subpanel locations, SurgePro AC surge protectors provide comprehensive surge protection for residential or office environments. 

The THQLSURGE surge protector is installed directly onto the bus inside the GE load center, similar to a circuit breaker. This configuration offers direct protection for the entire panel and all connected loads, ensuring enhanced safety and security for electrical systems. Technical Specifications Part # THQLSURGE Category Panel Accessories Subcategory Surge Arrestor/Suppressor Surge Protector Voltage Rating 120/240 V Circuit Configuration 1-Phase 3-Wire Surge Energy per Phase 1520 J Surge Current per Phase 27 Kiloampere Modes of Protection L-L, L-N Response Time Less Than 1 Nanosecond Mounting Plug-In Application AC Power, Service Entrance/Subpanel Information About THQLSURGE 

 The THQLSURGE is a surge protector manufactured by GE, designed to safeguard sensitive electronic equipment with LED confirmation and simple plug-in installation. SurgePro AC surge protectors are specifically engineered for service entrance or subpanel locations, offering compact, easy-to-install surge protection for residential or office environments. The THQLSURGE surge protector is uniquely designed to connect inside the GE load center, directly onto the bus, akin to a circuit breaker. This installation method enables direct protection for the entire panel and all connected loads. This surge protector serves as a vital component in ensuring the safety and reliability of electrical systems by mitigating the damaging effects of power surges. 

 The surge protector's LED confirmation feature provides visual indication of its operational status, allowing users to quickly verify that their equipment is adequately protected. Additionally, the plug-in installation method simplifies the setup process, eliminating the need for complex wiring procedures and ensuring hassle-free integration into existing electrical systems. Manufacturer information General Electric (GE) is a multinational conglomerate founded in 1892, based in the United States. It operates in various industries, including aviation, healthcare, renewable energy, and power. GE is known for its innovations in technology, manufacturing, and infrastructure solutions. IQElectro is not an authorized distributor. 

QElectro LLC (IQElectro) is NOT an Authorized Distributor or in any way affiliated with Rockwell Automation, Siemens, or any other Manufacturers. IQElectro is NOT an Authorized Dealer of this product. The product may be of older version, date codes, or design than that available from authorized dealers. As IQElectro is not an authorized dealer of this product, the Original Manufacturer's Warranty and Support DO NOT apply.IQElectro sells SURPLUS onlyand DOES NOT SELL SOFTWARE or FIRMWARE licenses For more detailed information, please refer to the full version of our disclaimer policy Disclaimer Policy.

OTHER INFORMATION

• Celeron™ socket 370-based single-board computer (SBC) with operating  system support for Windows NT®/Windows® 2000, Linux, VxWorks, QNX,  and Solaris 

• Special features for embedded applications 

— Up to 512 Mbyte IDE CompactFlash (optional) 

— Three programmable 16-bit timers 

— 32 Kbyte of battery-backed SRAM 

— Remote Ethernet booting supported 

— Software-selectable watchdog timer with reset 

— Supports VMEbus P2 connection to HD/floppy drive 

— PMC expansion site with VMEbus P2 I/O 

— PC•MIP expansion site supported 

— VME64 modes supported: A32/A24/D32/D16/D08(EO)/MBLT64/BLT32 

— VMEbus interrupt handler, interrupter, and system controller 

— Includes byte-swapping hardware for little-endian and big-endian data  interfacing (patent no. 6,032,212) 

— Enhanced bus error handling 

— Passive heat sink design (no moving parts) 

• Standard features include 

— Celeron socket 370 processor 

— Up to 256 Mbyte SDRAM using one 144-pin SODIMM 

— 64-bit Intel® AGP SVGA controller with 2 Mbyte SGRAM 

— On-board Fast Ethernet controller supporting 10BaseT and 100BaseTX  interfaces 

— On-board Ultra DMA/33 hard drive and floppy drive controllers with  VMEbus P2 I/O 

— Two high-performance 16550-compatible serial ports 

— PS/2-style keyboard and mouse port on front panel 

— Real-time clock and miniature speaker included