THQP120 | General Electric 1 Pole Circuit Breaker

THQP120 | General Electric 1 Pole Circuit Breaker

Product Description P/N: THQP120 DESCRIPTION / SPECIFICATIONS Description The General Electric THQP120 is a 1 pole circuit breaker designed as part of the THQP (Spacesaver) Series, catering to the needs of contractors and homeowners seeking cost-effective and space-saving solutions. These breakers, half the width of standard counterparts, optimize space utilization in load centers, contributing to significant cost savings. Specifically engineered for use in GE residential panels, the THQP120 breaker features a 30 Amp rating and operates at 120 Volts. Utilizing a plug-in connection method, it ensures convenient installation and maintenance. With a 10000 Ampere interrupting rating, it offers robust protection against overcurrents. 

 Technical Specifications Part # THQP120 Category Circuit Breaker Subcategory Load Center Circuit Breaker Interrupting Capacity Rating: 10 kAIC Voltage 120/240 V Trip Style Non-Interchangeable Frame Type Q-Line Amperage 20 A System Voltage 120 Vac, 120/240 Vac Poles 1 Trip Function LI Continuous Current Rated Standard 120 Vac Interrupting Rating 10 KAIC 120/240 Vac Interrupting Rating 10 KAIC Suitable for Reverse Feed Yes Wire Range (Cu/Al) 14-8 kcmil / 12-8 kcmil Long Time Fixed Instantaneous Fixed Protective Relays No Current Metering No Special Markings HACR, SWD GSA Compliance Yes Information About THQP120 The THQP120 breaker boasts a compact size, half the width of standard breakers, enabling the utilization of smaller load centers and ensuring optimal space utilization, which ultimately leads to cost savings. 

Despite its reduced size, it maintains the same level of functionality and performance as standard GE breakers. This breaker is specifically designed for use in GE residential panels, ensuring compatibility and seamless integration. Additionally, it is an authentic General Electric product, guaranteeing reliability and quality. Furthermore, the THQP120 breaker is CSA (Canadian Standards Association) approved and UL (Underwriters Laboratories) listed, meeting rigorous safety and performance standards. These certifications provide assurance of its compliance with industry regulations and standards, ensuring safe and reliable operation. Manufacturer information General Electric (GE) is a multinational conglomerate founded in 1892, based in the United States. 

It operates in various industries, including aviation, healthcare, renewable energy, and power. GE is known for its innovations in technology, manufacturing, and infrastructure solutions. IQElectro is not an authorized distributor. QElectro LLC (IQElectro) is NOT an Authorized Distributor or in any way affiliated with Rockwell Automation, Siemens, or any other Manufacturers. IQElectro is NOT an Authorized Dealer of this product. The product may be of older version, date codes, or design than that available from authorized dealers. As IQElectro is not an authorized dealer of this product, the Original Manufacturer's Warranty and Support DO NOT apply.IQElectro sells SURPLUS onlyand DOES NOT SELL SOFTWARE or FIRMWARE licenses For more detailed information, please refer to the full version of our disclaimer policy Disclaimer Policy.

OTHER INFORMATION

• Up to 1.26 GHz Pentium® III processor with 256 KB advanced  transfer cache  

• Up to 512 MB PC-133 SDRAM using a single SODIMM  

• Internal AGP SVGA controller with 4 MB display cache  

• 133 MHz system bus via Intel® 815E chipset  

• Dual Ethernet controllers supporting 10BaseT and 100BaseTX  interfaces  

• Optional PCI dual channel Ultra160 SCSI  

• Up to three (two with rear I/O support) PMC expansion sites  (IEEE-P1386 common mezzanine card standard, 5 V)  

• Up to 1 GB bootable flash on secondary IDE (optional)  

• Two 16-bit and two 32-bit programmable timers  

• 32 KB of nonvolatile SRAM  

• Software-selectable watchdog timer with reset  

• Remote Ethernet booting  

• Optional IDE hard disk drive  

• VME64 modes supported:  A32/A24/D32/D16/D08(EO)/MBLT64/BLT32  

• VMEbus interrupt handler, interrupter and system controller  

• Includes real time endian conversion hardware for littleendian and big-endian data interfacing (patent no. 6,032,212)  

• Enhanced bus error handling  

• Passive heat sink