GE ds200tcqbg2a RST Extended Analog I/O Board

GE ds200tcqbg2a RST Extended Analog I/O Board

Part Number ds200tcqbg2a Manufacturer General Electric Country of Manufacture As Per GE Manufacturing Policy Series Mark VI/VIe Function Module Availability In StockDS200TCQBG2A is an RST Extended Analog I/O Board under the Mark V series. A programmable logic device and EPROM modules are installed on the GE RST Extended Analog I/O Board DS200TCQBG2A. The GE RST Extended Analog I/O Board DS200TCQBG1BCB also has a side-mounted OK LED, a 50-pin connector, and 15 jumpers. Multiple test points are also included on the GE RST Extended Analog I/O Board DS200TCQBG2A, which are useful for checking the board's individual circuitry. 

The test points have unique IDs that begin with TP and end with a number. For example, one test point's ID is TP1, whereas another's ID is TP12. To use a test point, the servicer must have a testing device that is specifically intended for completing the circuit board test. A fully calibrated testing device is required. In addition, the front of the testing device's settings must be adequate for the testing. Place the board on a static-resistant surface, such as a flattened EDS bag. 

When working with a board or doing any work in the drive, always wear a wrist strap. The fact that the green LED on the side of the board is not lighted is the first sign that the board isn't working. While the drive is active, the LED is lighted and visible from the board cabinet when the board is receiving power and performing as specified. Circuits on the board may be defective if the LED is not lighted while the board is getting power, and checking the circuits may help to pinpoint the problem.

ABOUT THE DS200TCQBG2A

This DS200TCQBG2A printed circuit board product offering was originally designed and manufactured for trusted automated industrial manufacturer General Electric's Mark V Series of turbine control systems and turbine control system component products, as mentioned above. The Mark V Series that this DS200TCQBG2A PCB belongs to is a relatively recently-developed General Electric product series utilizing the Speedtronic technology patented by General Electric and first seen alongside the rollout of the Mark I Series in the later 1960s. The Mark V Series is considered a General Electric legacy series, as its is no longer in active production by its original manufacturer. This DS200TCQBG2A printed circuit board or PCB for short is better-describable as an Extended Analog I/O Board; the original functional product description it is referred to by in Mark V Turbine Control System Series instructional manual materials. This DS200TCQBG2A Extended Analog I/O Board is not the original product of its functionality to be developed and included in its Mark V Series; that would be the DS200TCQBG1 Extended Analog I/O Board notably missing this DS200TCQBG2A product's full revision table.

Hardware Tips and Specifications

As with any General Electric printed circuit board, this DS200TCQBG2A product offering necessitates its own set of hardware component inclusions and specifications, based on its intended functionality within the Mark V Series automated drive assembly. The GE RST Extended Analog I/O Board DS200TCQBG2A is populated with a  programmable logic device and EPROM modules. The GE RST Extended Analog I/O Board DS200TCQBG1BCB also has 1 OK LED that is viewable from the side, 1 50-pin connector, and 15 jumpers. The GE RST Extended Analog I/O Board DS200TCQBG2A also is populated with multiple test points that are valuable for testing the specific circuits on the board; these test points have IDs that are prefixed with TP and suffixed with a number. For example, the ID for one test point is TP1 and for another the ID is TP12. To use a test point the servicer must have a testing device that is designed for performing the specific test on the circuit board, and the testing device must be fully calibrated. Also, the settings on the front of the testing device must be appropriate for the testing. Before attempting diagnostic testing on this DS200TCQBG2A PCB, place the board on a static protective surface, such as a flattened EDS protective bag, and always wear a wrist strap when you work with a board or perform any work in the Mark V Series automated drive.

Our Main Brands

· - ABB Advant-800xA，Advant OCS，Bailey Infi 90 and Net 90，H&B Freelance 2000，DSQC Robots，IGCT / IGBT

· - GE General Electric Field Control, Genius I/O, QuickPanel, RX3i PacSystem, Series 90, Series 90, Series VersaMax

· - Allen Bradley Allen-Bradley SLC500, MicroLogix, CompactLogix, ControlLogix, PLC-5, Panel View,

· - Bently Nevada 3300 System, 3500 System

· - Honeywell 7800 Series, FSC, IPC, Mxopen, TDC 2000, TDC 3000, Experion PKS(C200,C300)

· - Yokogawa Centum CS - Centum VP, Centum XL - micro XL, FA-M3, ProSafe-PLC

· - Ovation, Foxboro, EPRO, Emerson DeltaV, Fuji, Siemens, HIMA, Prosoft, Invensys Triconex, ICS TRIPLEX, Woodward, Bachmann, Schneider