GE is2020isucg1a Single Unit Controller

GE is2020isucg1a Single Unit Controller 

Part Number is2020isucg1a Manufacturer General Electric Country of Manufacture As Per GE Manufacturing Policy Series Mark VI/VIe Function Module Availability In StockIS2020ISUCG1A is a single unit controller (UC2000) used in drive systems. The UC2000 is a single-unit controller. It contains two microprocessor-based printed wiring boards, a power supply board, and optional Genius and ARCNET expansion daughterboards as follows: Motherboard (DS200UCIA) CPU daughterboard (DS2000UCPB) Power supply board (DS200UPSA) Optional Genius daughterboard(s) (IC660ELB912) IS2020ISUCG1A Features Optional remote network OC2000s (Operator Console 2000) can be attached to the DLAN+ to send messages to multiple UC2000s and receive feedback from multiple system components. 

The UC2000 is programmed for an application using a Windows-based software package called the UC2000 Configurator. This program runs on an IBM PC" type computer. Completed application data is downloaded to the UC2000 through Ethernet. The Configurator can also create logical functions for drive control. These functions can be assigned to an Operator Console (OC2000) interface (keys and displays). Additionally, alphanumeric messages can be displayed on the OC2000 when certain conditions occur. IS2020ISUCG1A COMMUNICATIONS INTERFACES The UC2000 provides the following connections for external communications: DLAN+ (DLAN using ARCNET) connection for interface to system components and remote operator panels. Ethernet connection for configuration download. RS-232C serial interface connection.

OTHER INFORMATION

• Available with either the 1.1 GHz, 1.6 GHz or 1.8 GHz  Pentium® M processor  

• 1.4 GHz Pentium M processor coming soon  

• Up to 2 Mbyte of advanced L2 cache  

• Up to 1.5 Gbyte DDR SDRAM  

• Up to 2 Gbyte bootable CompactFlash on secondary IDE (see  ordering options)  

• Internal SVGA and DVI controller  

• Serial ATA support through P2 rear I/O  

• 400 MHz system bus via Intel® 855GME chipset  

• Ethernet controller supporting 10BaseT and 100BaseTX  through the front panel  

• Gigabit Ethernet controller supporting 10BaseT, 100BaseTX  and 1000BaseT interface with optional VITA 31.1 support  

• Four asynchronous 16550 compatible serial ports  

• Four Universal Serial Bus (USB) Rev. 2.0 connections, two on  the front panel and two rear I/O  

• PMC expansion site (PCI-X, 66 MHz)  

• 32 Kbyte of nonvolatile SRAM  

• Operating system support for Windows® XP, Windows 2000,  VxWorks®, QNX® , LynxOS® and Linux

Features 

 Single-Slot Module 

 SNP/SNP-X Protocol (master, slave) 

 CCM Protocol (master, slave, peer) 

 RTU Modbus Protocol (slave only) 

 Supports connection to MS-DOS or Windows

 programming and configuration software package (monitor only) 

 12 Mhz, 80C186 Microprocessor 

 Two RS-422/RS-485 or RS-232 Serial Ports 

 CCM, RTU and SNP/SNP-X Available on Either or Both Ports 

 Simultaneous Communications on Both Ports (up to 9.6 Kbps, or 19.2 Kbps individually) 

 High Performance Access to PLC Memory 

 Three Status LEDs 

 Reset pushbutton 

 Soft Switch Configuration (no switches or jumpers) 

 No Battery Required

For more information, you can call 15305925923