General Electric 151X1235BC01SA0 Ethernet Switch 10 Slot Industrial Control Network Device

General Electric 151X1235BC01SA0 Ethernet Switch  10 Slot Industrial Control Network Device

Model Number:151X1235BC01SA0 Type:Ethernet Switch Slots:10 Protocol Support:IEEE 802.3 Data Rate:10/100 Mbps Power Consumption:Less than 15W Operating Temperature:-40"C to +60"C Mounting Type:Panel Enclosure Type:IP30 Redundancy Features:Hot-swappable modules The General Electric 151X1235BC01SA0 10-slot Ethernet Switch is designed for high-speed, reliable data exchange in industrial settings. Its compact yet robust design ensures durability against harsh conditions, making it ideal for factories, warehouses, and manufacturing plants. 

 Equipped with 10 M12 connectors, this switch offers flexible connection options, supporting multiple devices simultaneously without compromising performance. It seamlessly integrates into existing Ethernet networks, enhancing connectivity and efficiency. Adhering to international standards, including IEEE 802.3, IEEE 802.3u, and IEEE 802.3ab, the switch ensures compatibility with a wide range of devices and protocols, simplifying network management and expansion. Featuring an operating temperature range from -40"C to 70"C, this switch can withstand extreme environmental conditions, ensuring reliable operation in various climates. 

Additionally, its power consumption of just 10W minimizes energy usage, contributing to cost-effective and sustainable operations. With its intuitive design and easy installation process, the General Electric 151X1235BC01SA0 Ethernet Switch streamlines network setup and maintenance, allowing IT professionals to focus on other critical tasks. It  a smart investment for companies seeking to optimize their industrial networks. This General Electric Ethernet switch is designed for high-speed data transmission, featuring 10 slots for customizable expansion and compatibility with various network protocols.

OTHER INFORMATION

• Up to 1.26 GHz Pentium® III processor with 256 KB advanced  transfer cache  

• Up to 512 MB PC-133 SDRAM using a single SODIMM  

• Internal AGP SVGA controller with 4 MB display cache  

• 133 MHz system bus via Intel® 815E chipset  

• Dual Ethernet controllers supporting 10BaseT and 100BaseTX  interfaces  

• Optional PCI dual channel Ultra160 SCSI  

• Up to three (two with rear I/O support) PMC expansion sites  (IEEE-P1386 common mezzanine card standard, 5 V)  

• Up to 1 GB bootable flash on secondary IDE (optional)  

• Two 16-bit and two 32-bit programmable timers  

• 32 KB of nonvolatile SRAM  

• Software-selectable watchdog timer with reset  

• Remote Ethernet booting  

• Optional IDE hard disk drive  

• VME64 modes supported:  A32/A24/D32/D16/D08(EO)/MBLT64/BLT32  

• VMEbus interrupt handler, interrupter and system controller  

• Includes real time endian conversion hardware for littleendian and big-endian data interfacing (patent no. 6,032,212)  

• Enhanced bus error handling  

• Passive heat sink

Precautions for Use

Installation Environment: It should be installed in a dry, well - ventilated, dust - free, and non - corrosive gas environment. Avoid installing it in places with high temperature, high humidity, vibration, or strong electromagnetic interference.

Wiring Specifications: Wire strictly in accordance with the specifications and requirements of the terminal strip to ensure that the wires are firmly connected and avoid problems such as loose connections or short - circuits.

Load Matching: Select an appropriate power terminal strip according to the power and current requirements of the connected devices to ensure that it can bear the corresponding load.

Regular Maintenance: Regularly inspect and maintain the power terminal strip, clean dust and debris, check for loose connections, and promptly detect and address potential problems.