193X532ADG04 | General Electric Field Control Card

193X532ADG04 | General Electric Field Control Card

Product Description P/N: 193X532ADG04DESCRIPTION / SPECIFICATIONSDescriptionThe 193X532ADG04 is a field control card used in industrial automation systems. It is designed for managing and controlling field-level operations. The card features a compact design for integration into control systems, providing essential control functions and interfacing capabilities. Specifications and operational parameters are detailed in the corresponding system manual.Technical SpecificationsCondition New / Never Used SurplusPart Number 193X-532ADG04Category DrivesSubcategory Drive BoardWeight 1.93 lbsType PC Board / Field Control CardDimensions 13.00 x 10.75 x 4.50 inchesInformation About 193X532ADG04The 193X532ADG04 is a field control card designed by General Electric (GE). 

It is a printed circuit board (PCB) used within various industrial systems. As a component in the 193x series, it serves critical functions in control and automation systems.The 193X532ADG04 is characterized by its large PCB format, equipped with multiple components of varying sizes. The board's upper section features several large components mounted on its surface, connected by black or white wires. A prominent feature on this upper section is a substantial metal plate to which a black plastic component is attached. This plastic component houses three fuses, which are white with silver metal ends. The PCB surface below this assembly includes a label specifying that Carbone Ferraz fuses of type A060FA-T13 or equivalent, rated at 600 volts and 15 amps, are to be used.Manufacturer informationGeneral Electric (GE) is a multinational conglomerate founded in 1892, based in the United States. It operates in various industries, including aviation, healthcare, renewable energy, and power.

 GE is known for its innovations in technology, manufacturing, and infrastructure solutions.IQElectro is not an authorized distributor.QElectro LLC (IQElectro) is NOT an Authorized Distributor or in any way affiliated with Rockwell Automation, Siemens, or any other Manufacturers. IQElectro is NOT an Authorized Dealer of this product. The product may be of older version, date codes, or design than that available from authorized dealers. As IQElectro is not an authorized dealer of this product, the Original Manufacturer's Warranty and Support DO NOT apply.IQElectro sells SURPLUS onlyand DOES NOT SELL SOFTWARE or FIRMWARE licenses For more detailed information, please refer to the full version of our disclaimer policy Disclaimer Policy.

Features 

 Single-Slot Module 

 SNP/SNP-X Protocol (master, slave) 

 CCM Protocol (master, slave, peer) 

 RTU Modbus Protocol (slave only) 

 Supports connection to MS-DOS

 or Windows

 programming and configuration software package (monitor only) 

 12 Mhz, 80C186 Microprocessor 

 Two RS-422/RS-485 or RS-232 Serial Ports 

 CCM, RTU and SNP/SNP-X Available on Either or Both Ports 

 Simultaneous Communications on Both Ports (up to 9.6 Kbps, or 19.2 Kbps individually) 

 High Performance Access to PLC Memory 

 Three Status LEDs 

 Reset pushbutton 

 Soft Switch Configuration (no switches or jumpers) 

 No Battery Required