DS3800HACA1A1A | General Electric Card Address Board Mark IV

DS3800HACA1A1A | General Electric Card Address Board Mark IV

Product Description P/N: DS3800HACA1A1ADescription / Specifications DescriptionThe DS3800HACA1A1A is a card address board designed for use with the Mark IV control system. It functions as an address interface card within the system's architecture, facilitating communication and addressing between different system components. This board is integral to the Mark IV's operation, ensuring proper signal routing and system functionality.Technical SpecificationsCondition New / Never Used SurplusPart Number DS3800HACA1A1ACategory Circuit BoardSubcategory Card Address BoardMachine Control Category PLCs/Machine ControlSubcategory PC Board PLC/Add-On BoardWeight 0.25 lbsInformation About DS3800HACA1A1AThe GE Circuit Board DS3800HACA1A1A is designed for use in control systems and features multiple pins connected via fine wires. 

The board includes a modular connector for interfacing with a drive and retention levers to secure the board in place.Prior to the installation or servicing of the DS3800HACA1A1A, it is critical to ensure the surrounding environment is free from hazards. Inspect the area for moisture on the floor and ensure it is thoroughly dried before beginning any work. If moisture is due to condensation from high humidity, dehumidifiers may need to be employed to reduce moisture levels. Moisture presents an electrical hazard as it can conduct electricity, increasing the risk of electrical shock.Additionally, inspect the work area for the presence of 2-prong electrical cords. These cords should be removed from the vicinity due to the potential risk of electrical shock and burns. Verify that emergency shut-off devices are in place, operational, and easily accessible. 

Ensure these devices are located near the drive and that all service personnel are familiar with their operation.Manufacturer informationGeneral Electric (GE) is a multinational conglomerate founded in 1892, based in the United States. It operates in various industries, including aviation, healthcare, renewable energy, and power. 

GE is known for its innovations in technology, manufacturing, and infrastructure solutions.IQElectro is not an authorized distributor.QElectro LLC (IQElectro) is NOT an Authorized Distributor or in any way affiliated with Rockwell Automation, Siemens, or any other Manufacturers. IQElectro is NOT an Authorized Dealer of this product. The product may be of older version, date codes, or design than that available from authorized dealers. As IQElectro is not an authorized dealer of this product, the Original Manufacturer's Warranty and Support DO NOT apply.IQElectro sells SURPLUS onlyand DOES NOT SELL SOFTWARE or FIRMWARE licenses For more detailed information, please refer to the full version of our disclaimer policy Disclaimer Policy.

Features 

 Single slot CPU 

 Provides 1 Mbyte of battery-backed memory in the same slot (up to 512 Kbytes available for use by ladder diagram application program)  Supports floating point calculations 

 Up to 12K discrete inputs and outputs (any mix - simplex mode only); 2048 voted discrete inputs, 2048 voted discrete outputs Up to 8K analog inputs (simplex mode only) and 8K analog outputs (simplex mode only); 1024 voted analog inputs 

 0.4 microseconds per boolean function 

 64 MHz, 80486DX2 microprocessor 

 Supports IC660/IC661 I/O (and IC697 I/O in simplex mode only) 

 Programmed by MS-DOS, or Windows

 software products running on Windows

 95 or Windows NT

 over Ethernet TCP/IP or through the SNP port. 

 Configurable data and program memory 

 Battery-backed calendar clock 

 Three position operation mode switch 

 Password controlled access 

 Remote programmer keyswitch memory protection 

 Four status LEDs 

 Software configuration (No DIP switches or jumpers) 

 Reference information inside front door 

 In-system upgradable firmware