193X704ABG02 | General Electric Printed Circuit Board

193X704ABG02 | General Electric Printed Circuit Board

Product Description P/N: 193X704ABG02 DESCRIPTION / SPECIFICATIONS Description The 193X704ABG02 General Electric Printed Circuit Board (PCB) is designed for high-performance industrial control systems. It features precise circuitry for effective signal distribution and connectivity. Built for durability, it supports reliable operation in demanding environments, ensuring stable system performance. Technical Specifications Condition New / Never Used Surplus Brand General Electric Category Drives Part Number 193X704ABG02 Subcategory Drive Board Type Printed Circuit Board (PCB) Input Voltage Typically 5 VDC Dimensions Approx. 250 mm (W) x 200 mm (H) x 50 mm (D) Mounting Rack mountable or panel mount (depends on application) Operating Temperature 0 to 60掳C (32 to 140掳F) Storage Temperature -40 to 85掳C (-40 to 185掳F) Humidity 5% to 95% (non-condensing) Information About 193X704ABG02 The 193X704ABG02 is a Sensitive Relay Board produced by GE for use in both their Speed Variator Drive system and SCR Drive system, both of which fall under GE's "Speed Variator Products" department.

 The Speed Variator Drive system is bidirectional and maintains a constant torque range, with horsepower changing linearly with speed while load torque remains constant. In contrast, the SCR Drive (SDR) system is unidirectional, offers adjustable acceleration, and includes an operator station. The 193X704ABG02 features a tall front panel in blue and silver with a rounded handle at the bottom edge. This panel is secured to the PCB with two screws and supported by a metal bar along the top edge of the board. The front panel displays the GE logo and board information and includes four rotating switches (Gain/P628/P627/Bias) that connect to rotary potentiometers through cut-outs. The board itself includes both carbon composite and metal film resistors, some of which are numbered, and can be mounted either horizontally or vertically. 

A single capacitor is positioned near the back edge of the board, along with two relays marked 22JNCC-22752 and 104X168AA050, each with relay diagrams. The PCB is divided by a vertically mounted sub-board, marked 193X701CA, which serves as a universal amplifier board and is populated with additional resistors, capacitors, transistors, and other components. Manufacturer information General Electric (GE) is a multinational conglomerate founded in 1892, based in the United States. It operates in various industries, including aviation, healthcare, renewable energy, and power. GE is known for its innovations in technology, manufacturing, and infrastructure solutions.

 IQElectro is not an authorized distributor. QElectro LLC (IQElectro) is NOT an Authorized Distributor or in any way affiliated with Rockwell Automation, Siemens, or any other Manufacturers. IQElectro is NOT an Authorized Dealer of this product. The product may be of older version, date codes, or design than that available from authorized dealers. As IQElectro is not an authorized dealer of this product, the Original Manufacturer's Warranty and Support DO NOT apply.IQElectro sells SURPLUS onlyand DOES NOT SELL SOFTWARE or FIRMWARE licenses For more detailed information, please refer to the full version of our disclaimer policy Disclaimer Policy.

Instructions and warnings related to the operation of the product:

The following specifications must be strictly observed:

l The technical specifications and typical applications of the product system must be strictly observed.

l PERSONNEL TRAINING: Only trained personnel may install, operate, maintain or repair the product system. These personnel must be instructed on the

Hazardous area conditions must be instructed and explained to these personnel.

l Unauthorised modifications: No modifications or structural changes may be made to the product system.

l Maintenance Responsibility: It must be ensured that the product system is only used under appropriate conditions and in a condition that is fully fit for purpose.

l Working environment: The user must fulfil the specified environmental conditions:

Safety regulations

The following safety regulations must be fully observed when (maintenance) work is carried out on the product system:

1 Disconnect completely.

2 Secure to prevent reconnection.

3 Confirm that the installation has been completed.

4 Perform grounding and short-circuiting.