DS200RTBAG2A | General Electric Relay Terminal Board

DS200RTBAG2A | General Electric Relay Terminal Board

Product Description P/N: DS200RTBAG2A Description / Specifications Description The General Electric DS200RTBAG2A Relay Terminal Board was produced for use in the Mark V Series of turbine control systems. Technical Specifications Condition New / Never Used Surplus Brand General Electric Category Drives Part Number DS200RTBAG2A Subcategory Drive Board Series Mark V Functional Description Relay Terminal Board Functional Acronym RTBA Mark V Series Grouping Group 2 Information About DS200RTBAG2A The DS200RTBAG2A Relay Terminal Board is designed for the Mark V Turbine Control System Series, and its hardware components are tailored to support its intended functionality. 

The board features ten relays, divided into two types: seven DPDT relays and three 4PDT relays. Each DPDT relay has two Form C contacts, with each contact handling a 10A charge and a 110 VDC coil. These relays are located between positions K20 and K26 on the board. The 4PDT relays have four contacts per relay, each with a 1A charge and a 110 VDC coil. All relays are protected by a 130 VAC metal oxide varistor (MOV) and can be easily replaced as needed. Proper installation and adherence to the drive's parameters are essential for the DS200RTBAG2A to function correctly. For detailed wiring and installation instructions, refer to the board鈥檚 manual and datasheet available in the manuals tab. 

The DS200RTBAG2A also includes manually adjustable jumpers, each labeled with a "J" prefix for identification, such as the JP8 K20-K22 Power Source-Selecting Jumper and the JP9 RPL. 1 Connection Jumper. These jumpers provide flexibility in customization. The board is protected by a standard PCB surface coating, which serves as a basic protective layer. The board's performance specifications and dimensions may have been modified due to its A-rated functional revision. Manufacturer information General Electric (GE) is a multinational conglomerate founded in 1892, based in the United States. It operates in various industries, including aviation, healthcare, renewable energy, and power. GE is known for its innovations in technology, manufacturing, and infrastructure solutions. IQElectro is not an authorized distributor. 

QElectro LLC (IQElectro) is NOT an Authorized Distributor or in any way affiliated with Rockwell Automation, Siemens, or any other Manufacturers. IQElectro is NOT an Authorized Dealer of this product. The product may be of older version, date codes, or design than that available from authorized dealers. As IQElectro is not an authorized dealer of this product, the Original Manufacturer's Warranty and Support DO NOT apply.IQElectro sells SURPLUS onlyand DOES NOT SELL SOFTWARE or FIRMWARE licenses For more detailed information, please refer to the full version of our disclaimer policy Disclaimer Policy.

Instructions and warnings related to the operation of the product:

The following specifications must be strictly observed:

l The technical specifications and typical applications of the product system must be strictly observed.

l PERSONNEL TRAINING: Only trained personnel may install, operate, maintain or repair the product system. These personnel must be instructed on the

Hazardous area conditions must be instructed and explained to these personnel.

l Unauthorised modifications: No modifications or structural changes may be made to the product system.

l Maintenance Responsibility: It must be ensured that the product system is only used under appropriate conditions and in a condition that is fully fit for purpose.

l Working environment: The user must fulfil the specified environmental conditions:

Safety regulations

The following safety regulations must be fully observed when (maintenance) work is carried out on the product system:

1 Disconnect completely.

2 Secure to prevent reconnection.

3 Confirm that the installation has been completed.

4 Perform grounding and short-circuiting.