GE 531X139APMARM7 & F31X139APMASG2 CONTROL MODULE Industrial Drive System Enhancer

531X139APMARM7 & F31X139APMASG2 CONTROL MODULE  Industrial Drive System Enhancer

Product Type:Control Module Model Number:531X139APMARM7 / F31X139APMASG2 Manufacturer:General Electric Dimensions:3.8 x 27.9 x 22.9 cm (L x W x H) Weight:0.7 kg Operating Temperature:-20"C to +70"C Storage Temperature:-40"C to +85"C Input Voltage:DC 300V Output Current:Up to 2A per channel Interface Connections:4 terminal strips with 18 screw connections, 4 header connectors, 3 male vertical pin cable connectors Signal-Level-Detector Relays:5 programmable signal-level-detector relays Analog Interfaces:Inputs and outputs for seamless external equipment integration Jumper Settings:Over 40 jumper switches for customizable configurations 

 The GE 531X139APMARM7 & F31X139APMASG2 CONTROL MODULE offers unparalleled performance, seamlessly integrating with a wide range of industrial drive systems. Designed with robust materials for enhanced durability, these modules feature advanced circuitry that ensures smooth operation under extreme conditions. Key design highlights include a modular architecture that facilitates easy installation and maintenance, along with comprehensive diagnostic capabilities for quick problem identification and resolution. Engineered for efficiency, these modules boast low power consumption and are optimized for energy-saving operations, making them ideal for sustainable industrial applications. Supporting a variety of communication protocols, the modules ensure seamless integration with existing control systems, enhancing operational flexibility and automation capabilities. 

 Compliance with international safety standards (UL, CE) guarantees reliability and peace of mind for users across different industries, ensuring safe and efficient operation of industrial machinery. The GE 531X139APMARM7 & F31X139APMASG2 CONTROL MODULE is a versatile and advanced component designed to significantly enhance industrial drive systems. This dual-module setup is specifically tailored for applications requiring precise control, reliability, and efficiency in heavy-duty environments. 

Compatibility 

ƒ Compatible with any Series 90-30 CPU except IC693CPU321 and IC693CPU340. Configuration size is limited for CPU311/313/331, as described on the next page. 

ƒ Requires release 8.0 CPU firmware. The latest Release 10 is recommended, if available for the particular CPU. 

ƒ Requires CIMPLICITY Machine Edition Logic Developer PLC version 3.0 plus the appropriate service pack or special (or a version later than 3.0). 

ƒ Not compatible with the VersaPro™, Control, or Logicmaster™ programming software. 

ƒ The Series 90-30 Hand-Held Programmer (IC693PRG300) cannot be used to configure this module. New Features The Series 90-30 DeviceNet Master Module allows a Series 90-30 PLC to send and receive I/O data from a DeviceNet network. 

Module features include: 

ƒ Support for all standard data rates (125K, 250K, 500K) 

ƒ Support for 255 bytes input data transfer and 255 bytes output data transfer per slave 

ƒ Support for 3972 bytes of input data transfer and 3972 bytes of output data transfer per master 

ƒ Support for two I/O connections per Slave - Typically one connection is used for Polled and the other is used for Strobe, Cyclic, or COS 

ƒ Support for Poll, Strobe, Cyclic and COS I/O Connections, Fragmented I/O and Explicit Messaging 

ƒ Support for Unconnected Message Manager (UCMM) with 1 proxy connection per slave device 

ƒ Support for configuration of the global scan rate 

ƒ Support for configuration of update rates for Poll and COS/Cyclic on a connection basis 

ƒ Support for PLC-application initiated explicit messaging via a COMMREQ 

ƒ Master can be configured to operate as a slave simultaneously with master operation 

ƒ Configurable fault behavior on loss of communication 

ƒ Reports loss or reestablishment of communication with slaves in PLC fault table (configurable) 

ƒ Support for 64 network device status bits (note: the bit for the master itself is always zero) 

ƒ Firmware update via service port on module