531X185CPTAKG1 | General Electric VA-5 Pulse Transformer Board
Product Description P/N: 531X185CPTAKG1DESCRIPTION / SPECIFICATIONSDescriptionThe 531X185CPTAKG1 is a VA-5 Pulse Transformer Board. It is used for pulse signal transformation within specified electronic systems. The board is designed to convert and isolate pulse signals to ensure accurate signal transmission and integrity.Technical SpecificationsCondition New / Never Used SurplusPart # 531X185CPTAKG1Category DrivesSubcategory Drive BoardWeight 1.00 lbsDescription Pulse Board, PC AC500, CONV, XFMRInformation About 531X185CPTAKG1The 531X185CPTAKG1 is a VA-5 Conv. Pulse Transformer circuit board manufactured by General Electric.
This board is substantial in size and features numerous large components. It includes nine large black resistors, each marked with the following codes: HE1-8808, FS-20S-1 N, 104X123DA010, and 2.2 C/C. These codes indicate the specific characteristics and ratings of the resistors. Additionally, the board contains two smaller black resistors labeled CG5, 33惟 5%, 3W, which provide further resistive functionality.The circuit board is equipped with thirty-eight axial-lead resistors. These resistors are identified by their color-coded strips, which allow engineers to determine their resistance values through a color-coding system and associated equations.The 531X185CPTAKG1 features fifteen black diodes. Each diode has a small grey line at one end, which indicates the direction of current flow through the component. The board also includes three sets of Jumper Ports.
Each Jumper Port has two positions and can be adjusted using sleeve caps to alter the board's configuration.Manufacturer informationGeneral Electric (GE) is a multinational conglomerate founded in 1892, based in the United States. It operates in various industries, including aviation, healthcare, renewable energy, and power. GE is known for its innovations in technology, manufacturing, and infrastructure solutions.IQElectro is not an authorized distributor.QElectro LLC (IQElectro) is NOT an Authorized Distributor or in any way affiliated with Rockwell Automation, Siemens, or any other Manufacturers. IQElectro is NOT an Authorized Dealer of this product. The product may be of older version, date codes, or design than that available from authorized dealers. As IQElectro is not an authorized dealer of this product, the Original Manufacturer's Warranty and Support DO NOT apply.IQElectro sells SURPLUS onlyand DOES NOT SELL SOFTWARE or FIRMWARE licenses For more detailed information, please refer to the full version of our disclaimer policy Disclaimer Policy.
Features
Single-Slot Module
SNP/SNP-X Protocol (master, slave)
CCM Protocol (master, slave, peer)
RTU Modbus Protocol (slave only)
Supports connection to MS-DOS or Windows
programming and configuration software package (monitor only)
12 Mhz, 80C186 Microprocessor
Two RS-422/RS-485 or RS-232 Serial Ports
CCM, RTU and SNP/SNP-X Available on Either or Both Ports
Simultaneous Communications on Both Ports (up to 9.6 Kbps, or 19.2 Kbps individually)
High Performance Access to PLC Memory
Three Status LEDs
Reset pushbutton
Soft Switch Configuration (no switches or jumpers)
No Battery Required
email:1583694102@qq.com
wang@kongjiangauto.com