531X308PCSADG1 | General Electric Power Connection Board

531X308PCSADG1 | General Electric Power Connection Board

Product Description P/N: 531X308PCSADG1 DESCRIPTION / SPECIFICATIONS Description The GE Power Connection Board 531X308PCSADG1 serves as a replacement component for various original equipment power connection boards. This board is sensitive to static electricity, requiring strict adherence to anti-static handling procedures. Technical Specifications Part Number 531X308PCSADG1 Category Drives Subcategory Drive Board Weight 2.00 lbs Description Power Connection Board Components Pulse Transformer, 14 Capacitors Static Sensitivity High Information About 531X308PCSADG1 

 The GE Power Connection Board 531X308PCSADG1 is a replacement component intended for use with various original equipment power connection boards. This board, identified as part number 531X308PCSADG1, is classified under the category of drives and specifically within the subcategory of drive boards. It is designed to be installed in systems requiring power connection interfaces and is characterized by its sensitivity to electrostatic discharge (ESD). The 531X308PCSADG1 board is particularly susceptible to damage caused by static electricity. As such, stringent guidelines must be followed to ensure proper handling and installation. 

It is imperative to always use a protective wrist strap when working with this board or any related equipment. The wrist strap consists of two components: one end is a clip that attaches to a bare metal structure, such as a workbench, to provide a grounding path for any electrical buildup; the other end is a band worn around the wrist to prevent static accumulation on the body. Proper usage of the wrist strap is crucial for protecting the board from ESD damage. Manufacturer information General Electric (GE) is a multinational conglomerate founded in 1892, based in the United States. It operates in various industries, including aviation, healthcare, renewable energy, and power. 

GE is known for its innovations in technology, manufacturing, and infrastructure solutions. IQElectro is not an authorized distributor. QElectro LLC (IQElectro) is NOT an Authorized Distributor or in any way affiliated with Rockwell Automation, Siemens, or any other Manufacturers. IQElectro is NOT an Authorized Dealer of this product. The product may be of older version, date codes, or design than that available from authorized dealers. As IQElectro is not an authorized dealer of this product, the Original Manufacturer's Warranty and Support DO NOT apply.IQElectro sells SURPLUS onlyand DOES NOT SELL SOFTWARE or FIRMWARE licenses For more detailed information, please refer to the full version of our disclaimer policy Disclaimer Policy.

Features 

 Single-Slot Module 

 SNP/SNP-X Protocol (master, slave) 

 CCM Protocol (master, slave, peer) 

 RTU Modbus Protocol (slave only) 

 Supports connection to MS-DOS or Windows

 programming and configuration software package (monitor only) 

 12 Mhz, 80C186 Microprocessor 

 Two RS-422/RS-485 or RS-232 Serial Ports 

 CCM, RTU and SNP/SNP-X Available on Either or Both Ports 

 Simultaneous Communications on Both Ports (up to 9.6 Kbps, or 19.2 Kbps individually) 

 High Performance Access to PLC Memory 

 Three Status LEDs 

 Reset pushbutton 

 Soft Switch Configuration (no switches or jumpers) 

 No Battery Required