ADVANTEST R3860A/1400-2010 vector network analyzer

ADVANTEST R3860A/1400-2010 vector network analyzer

PRODUCT INTRODUCTION

Basic Information

Model: ADVANTEST R3860A/1400-2010

Brand: ADVANTEST

Type: Vector Network Analyser

The ADVANTEST R3860A/1400-2010 Vector Network Analyser is a powerful and stable test equipment widely used in RF and microwave testing and analysis.

Technical specifications

Frequency Range:

Generally, the ADVANTEST R3860A series of network analysers have a wide frequency range, but specific to the R3860A/1400-2010 model, it may be necessary to consult the specific product manual or contact the manufacturer for accurate information. In general, the R3860A series may cover a range from low frequencies (e.g., 300kHz) to high frequencies (e.g., 8GHz or higher).

Test Ports:

The model may offer multiple test ports, the exact number and configuration of which may vary from model to model. For example, a common network analyser may offer 2 or more test ports.

Test Speed:

The test speed is usually fast, e.g. 10ms per point or faster, depending on the configuration and test parameters.

Scanline noise:

Scanline noise levels may vary over different frequency ranges. For example, at 100kHz RBW, the noise level may range from 0.005dB rms to 0.040dB rms, depending on the frequency range.

Display:

Equipped with a 12’ SVGA detachable touchscreen LCD monitor, providing a clear display and convenient operation experience.

Interface and Compatibility:

Supports a variety of interfaces and communication protocols, such as GPIB, PCIe-GPIB, etc., which facilitates integration with various test equipment and software.

Application Areas

ADVANTEST R3860A/1400-2010 Vector Network Analyzer is widely used in a variety of tests and analyses in the RF and microwave fields, including filters, amplifiers, mixers, as well as the parameters of active and passive microwave components in the system debugging and testing.

Instructions and warnings related to the operation of the product:

The following specifications must be strictly observed:

 The technical specifications and typical applications of the product system must be strictly observed.

 PERSONNEL TRAINING: Only trained personnel may install, operate, maintain or repair the product system. These personnel must be instructed on the

These personnel must be instructed and briefed on the conditions in the hazardous area.

 Unauthorised modifications: No modifications or structural changes may be made to the product system.

 Maintenance Responsibility: It must be ensured that the product system is only used under appropriate conditions and in a condition that is fully fit for purpose.

 Working environment: The user must fulfil the specified environmental conditions:

Safety regulations

The following safety regulations must be fully observed when (maintenance) work is carried out on the product system:

1 Disconnect completely.

2 Secure to prevent reconnection.

3 Confirm that the installation has been completed.

4 Perform grounding and short-circuiting.