CR463L20AJA | General Electric Contactor

CR463L20AJA | General Electric Contactor

Product Description P/N: CR463L20AJA DESCRIPTION / SPECIFICATIONS Description The CR463L20AJA is an electrically held lighting contactor from General Electric's CR460 Series, designated as Type CR463. This device features two poles (2P) and is designed for single-phase (1PH) applications. It is rated for 30 amperes (30A) and can operate at voltages up to 600 volts (600V). The contactor is equipped with a 110V 50Hz or 115-120V 60Hz coil and is classified as an open type. 

 Technical Specifications Brand GE Type Electrically/Mechanically Held Series CR460 Coil Voltage 110/115 to 120 VAC Maximum Load Current 30 A Number Of Poles 2 Frequency Rating 50/60 Hz Contact Type Auxiliary Contact Configuration 2NO Enclosure Type Open Information About CR463L20AJA The General Electric CR463L20AJA is an electrically held lighting contactor from the CR460 Series, specifically classified under Type CR463. This device features a 2-pole configuration and operates on a single-phase (1PH) electrical system.

 It has a maximum load current rating of 30 amperes (30A) and is capable of handling voltage levels up to 600 volts (600V). The contactor is designed for use in both 50Hz and 60Hz frequency systems, with coil voltage specifications of 110V at 50Hz and 115-120V at 60Hz. The CR463L20AJA contactor is categorized as an open type, meaning it is intended for installation within an enclosure that provides the necessary environmental protection. This model includes a 2 normally open (2N/O) auxiliary contact configuration, which allows for additional control capabilities within the lighting circuit or connected systems.

These auxiliary contacts are essential for providing feedback or initiating other control sequences in conjunction with the main contacts. This particular contactor is suitable for integration into General Electric's CR460 Series motor control systems, making it a versatile component for various industrial and commercial applications. The electrically held design ensures that the contactor remains engaged as long as the control voltage is applied, providing continuous operation until the control signal is removed. Manufacturer information General Electric (GE) is a multinational conglomerate founded in 1892, based in the United States. 

It operates in various industries, including aviation, healthcare, renewable energy, and power. GE is known for its innovations in technology, manufacturing, and infrastructure solutions. IQElectro is not an authorized distributor. QElectro LLC (IQElectro) is NOT an Authorized Distributor or in any way affiliated with Rockwell Automation, Siemens, or any other Manufacturers. IQElectro is NOT an Authorized Dealer of this product. The product may be of older version, date codes, or design than that available from authorized dealers. As IQElectro is not an authorized dealer of this product, the Original Manufacturer's Warranty and Support DO NOT apply.IQElectro sells SURPLUS onlyand DOES NOT SELL SOFTWARE or FIRMWARE licenses For more detailed information, please refer to the full version of our disclaimer policy Disclaimer Policy.

Benefits

 Single slot CPU 

 Provides 1 Mbyte of battery-backed memory in the same slot (up to 512 Kbytes available for use by ladder diagram application program)  Supports floating point calculations 

 Up to 12K discrete inputs and outputs (any mix - simplex mode only); 2048 voted discrete inputs, 2048 voted discrete outputs Up to 8K analog inputs (simplex mode only) and 8K analog outputs (simplex mode only); 1024 voted analog inputs 

 0.4 microseconds per boolean function 

 64 MHz, 80486DX2 microprocessor 

 Supports IC660/IC661 I/O (and IC697 I/O in simplex mode only) 

 Programmed by MS-DOS

, or Windows

 software products running on Windows

 95 or Windows NT

 over Ethernet TCP/IP or through the SNP port. 

 Configurable data and program memory 

 Battery-backed calendar clock 

 Three position operation mode switch 

 Password controlled access 

 Remote programmer keyswitch memory protection 

 Four status LEDs 

 Software configuration (No DIP switches or jumpers) 

 Reference information inside front door 

 In-system upgradable firmware