TJK636F000 | General Electric Molded Case Circuit Breaker

TJK636F000 | General Electric Molded Case Circuit Breaker

Product Description P/N: TJK636F000 DESCRIPTION / SPECIFICATIONS Description The TJK636F000 by General Electric is a molded case circuit breaker frame, part of the General Electric J600 Line. It is a Type TJK breaker featuring a three-pole (3P), three-phase (3PH) configuration. The breaker is rated for 600 amperes (600A) and operates at 600 volts (600V) with a standard interrupting capacity of 30kA at 480V. Designed for bolt-on mounting, this thermal magnetic circuit breaker frame operates efficiently at 40 degrees Celsius.. 

 Technical Specifications Part Number TJK636F000 Manufacturer General Electric Family J600 Line Pole 3 Amp 600 Volt 600 Phase 3 Information About TJK636F000 The TJK636F000 is a molded case circuit breaker manufactured by General Electric, belonging to the J600 Line. This specific model is a Type TJK circuit breaker, designed for robust electrical protection and reliable operation within its specified parameters. The unit features three poles (3P), making it suitable for three-phase (3PH) electrical systems. It is rated for a continuous current of 600 amperes (600A) and is capable of handling voltages up to 600 volts (600V). The interrupting capacity of the TJK636F000 circuit breaker is rated at 30kA at 480V. 

This means the breaker can interrupt a fault current of up to 30,000 amperes without sustaining damage, ensuring the protection of the electrical system and associated equipment during high fault conditions. The breaker operates effectively within a temperature range of 40 degrees Celsius, maintaining performance and reliability under standard environmental conditions. This circuit breaker is designed with a bolt-on mounting style, facilitating secure and stable installation within electrical panels. The frame of the TJK636F000 is constructed as a thermal magnetic molded case, combining both thermal and magnetic trip functions. 

The thermal trip function provides protection against prolonged overcurrent conditions, while the magnetic trip function offers instantaneous protection against short circuits. This dual functionality ensures comprehensive protection for electrical circuits, enhancing safety and minimizing downtime due to electrical faults. Manufacturer information General Electric (GE) is a multinational conglomerate founded in 1892, based in the United States. It operates in various industries, including aviation, healthcare, renewable energy, and power. GE is known for its innovations in technology, manufacturing, and infrastructure solutions. 

 IQElectro is not an authorized distributor. QElectro LLC (IQElectro) is NOT an Authorized Distributor or in any way affiliated with Rockwell Automation, Siemens, or any other Manufacturers. IQElectro is NOT an Authorized Dealer of this product. The product may be of older version, date codes, or design than that available from authorized dealers. As IQElectro is not an authorized dealer of this product, the Original Manufacturer's Warranty and Support DO NOT apply.IQElectro sells SURPLUS onlyand DOES NOT SELL SOFTWARE or FIRMWARE licenses For more detailed information, please refer to the full version of our disclaimer policy Disclaimer Policy.

Compatibility 

ƒ Compatible with any Series 90-30 CPU except IC693CPU321 and IC693CPU340. Configuration size is limited for CPU311/313/331, as described on the next page. 

ƒ Requires release 8.0 CPU firmware. The latest Release 10 is recommended, if available for the particular CPU. 

ƒ Requires CIMPLICITY Machine Edition Logic Developer PLC version 3.0 plus the appropriate service pack or special (or a version later than 3.0). 

ƒ Not compatible with the VersaPro™, Control, or Logicmaster™ programming software. 

ƒ The Series 90-30 Hand-Held Programmer (IC693PRG300) cannot be used to configure this module. New Features The Series 90-30 DeviceNet Master Module allows a Series 90-30 PLC to send and receive I/O data from a DeviceNet network. 

Module features include: 

ƒ Support for all standard data rates (125K, 250K, 500K) 

ƒ Support for 255 bytes input data transfer and 255 bytes output data transfer per slave 

ƒ Support for 3972 bytes of input data transfer and 3972 bytes of output data transfer per master 

ƒ Support for two I/O connections per Slave - Typically one connection is used for Polled and the other is used for Strobe, Cyclic, or COS 

ƒ Support for Poll, Strobe, Cyclic and COS I/O Connections, Fragmented I/O and Explicit Messaging 

ƒ Support for Unconnected Message Manager (UCMM) with 1 proxy connection per slave device 

ƒ Support for configuration of the global scan rate 

ƒ Support for configuration of update rates for Poll and COS/Cyclic on a connection basis 

ƒ Support for PLC-application initiated explicit messaging via a COMMREQ 

ƒ Master can be configured to operate as a slave simultaneously with master operation 

ƒ Configurable fault behavior on loss of communication 

ƒ Reports loss or reestablishment of communication with slaves in PLC fault table (configurable) 

ƒ Support for 64 network device status bits (note: the bit for the master itself is always zero) 

ƒ Firmware update via service port on module