GE DS200SHVMG1ACC High-Voltage M-Frame Interface Board, Precision Engineered for Industrial Control Systems

DS200SHVMG1ACC High-Voltage M-Frame Interface Board, Precision Engineered for Industrial Control Systems

Dimensions:8.2 cm x 12.2 cm x 6 cm Weight:0.36 kg Operating Temperature:-40"C to +70"C Material:Ruggedized Metal Housing Certifications:CE, UL, FCC Interface Compatibility:RS-232, RS-485 Crafted with precision for GE  Mark V series, the DS200SHVMG1ACC Interface Board seamlessly integrates into existing industrial control systems, ensuring reliable operation under extreme conditions. Equipped with advanced signal processing capabilities, this board optimizes the performance of high-voltage systems, delivering precise control and enhanced system efficiency. 

 Designed with a compact yet rugged construction, it withstands the rigors of industrial environments, offering durability and longevity. Supporting a wide range of communication protocols, including MODBUS RTU, it facilitates seamless integration with various control systems and software platforms. The DS200SHVMG1ACC Interface Board is engineered to meet the stringent requirements of high-voltage applications, providing a cost-effective solution for industrial automation. The GE DS200SHVMG1ACC High Voltage M-Frame Interface Board is a critical component for enhancing the performance of GE  Mark V Turbine Control Systems, designed for robust, high-voltage applications.

Features 

▪ Contains 10 Mbytes of battery-backed user memory and 10 Mbytes of non-volatile flash user  memory. 

▪ Provides access to bulk memory via reference table %W. 

▪ Configurable data and program memory. 

▪ Programming in Ladder Diagram, C, Structured Text, and Function Block Diagram. 

▪ Supports auto-located Symbolic Variables that can use any amount of user memory. 

▪ Reference table sizes include 32Kbits for discrete %I and %Q and up to 32K words each for  analog %AI and %AQ. 

▪ Supports Series 90-70 discrete and analog I/O, communications, and other modules. For a  list of modules supported, refer to the PACSystems RX7i Installation Manual, GFK-2223. 

▪ Supports all VME modules supported by Series 90-70. 

▪ Supports RX7i data monitoring over the web. Allows a combined total of up to 16 web server  and FTP connections. 

▪ Supports up to 512 program blocks. Maximum size for a block is 128KB. 

▪ Test Edit mode allows you to easily test modifications to a running program. 

▪ Bit-in-word referencing. 

▪ Battery-backed calendar clock. 

▪ In-system upgradeable firmware. 

▪ Three isolated serial ports: an RS-485 serial port, an RS-232 serial port, and an RS-232  Ethernet station manager serial port. 

▪ The embedded Ethernet interface provides: 

- Data exchange using Ethernet Global Data (EGD) 

- TCP/IP communication services using SRTP 

- Support for SRTP Channels, Modbus/TCP Server, and Modbus/TCP Client 

- Full programming and configuration services 

- Comprehensive station management and diagnostic tools 

- Two full-duplex 10BaseT/100BaseT/TX (RJ-45 Connector) ports with an internal network  switch providing auto-negotiated network speed, duplex mode, and crossover detection. 

- User-configurable Redundant IP address 

- Time synchronization to SNTP time server on Ethernet network (when used with  Release 5.00 or later CPU module).