GE DS200TBQBG1A Input Termination Module

GE DS200TBQBG1A Input Termination Module

Part Number DS200TBQBG1A Manufacturer General Electric Country of Manufacture As Per GE Manufacturing Policy Series Mark V Function Module Availability In StockDS200TBQBG1A is an Input Termination Module developed by General Electric. The R2 and R3 cores each have a seventh position, which is the Input Termination Module (TBQB). The TCQA and TCQC boards in the R1 core are coupled with the TBQB terminal board in the R2 core. 

The TCQA and TCQC boards in the R3 core are linked to the TBQB terminal board there. The TBQB terminal board receives the input signals for voltage, vibration, and pulse rate. DS200TBQBG1A Connections JGR - Writes the analog current, voltage, and vibration signals to the TCQA board in the appropriate cores. JHR - Writes the compressor stall detection and pulse rate inputs to the TCQC board in the appropriate cores. JGS/T - Not frequently used. JHS/T - Not frequently used. Hardware Configuration BJ1 through BJ4 - Used in older applications to fan out the pressure transducer #1 input signal (compressor stall detection). Used in conjunction with BJ1 through BJ4 are BJ5 through BJ7. Install a burden resistor so that the pressure transducer #1's input signal is converted from a voltage signal to a mA signal. BJ8 through BJ15 - Sets the current or voltage for analog inputs.

OTHER INFORMATION

• Celeron™ socket 370-based single-board computer (SBC) with operating  system support for Windows NT®/Windows® 2000, Linux, VxWorks, QNX,  and Solaris 

• Special features for embedded applications 

— Up to 512 Mbyte IDE CompactFlash (optional) 

— Three programmable 16-bit timers 

— 32 Kbyte of battery-backed SRAM 

— Remote Ethernet booting supported 

— Software-selectable watchdog timer with reset 

— Supports VMEbus P2 connection to HD/floppy drive 

— PMC expansion site with VMEbus P2 I/O 

— PC•MIP expansion site supported 

— VME64 modes supported: A32/A24/D32/D16/D08(EO)/MBLT64/BLT32 

— VMEbus interrupt handler, interrupter, and system controller 

— Includes byte-swapping hardware for little-endian and big-endian data  interfacing (patent no. 6,032,212) 

— Enhanced bus error handling 

— Passive heat sink design (no moving parts) 

• Standard features include 

— Celeron socket 370 processor 

— Up to 256 Mbyte SDRAM using one 144-pin SODIMM 

— 64-bit Intel® AGP SVGA controller with 2 Mbyte SGRAM 

— On-board Fast Ethernet controller supporting 10BaseT and 100BaseTX  interfaces 

— On-board Ultra DMA/33 hard drive and floppy drive controllers with  VMEbus P2 I/O 

— Two high-performance 16550-compatible serial ports 

— PS/2-style keyboard and mouse port on front panel 

— Real-time clock and miniature speaker included

Our Main Brands

· - ABB Advant-800xA，Advant OCS，Bailey Infi 90 and Net 90，H&B Freelance 2000，DSQC Robots，IGCT / IGBT

· - GE General Electric Field Control, Genius I/O, QuickPanel, RX3i PacSystem, Series 90, Series 90, Series VersaMax

· - Allen Bradley Allen-Bradley SLC500, MicroLogix, CompactLogix, ControlLogix, PLC-5, Panel View,

· - Bently Nevada 3300 System, 3500 System

· - Honeywell 7800 Series, FSC, IPC, Mxopen, TDC 2000, TDC 3000, Experion PKS(C200,C300)

· - Yokogawa Centum CS - Centum VP, Centum XL - micro XL, FA-M3, ProSafe-PLC

· - Ovation, Foxboro, EPRO, Emerson DeltaV, Fuji, Siemens, HIMA, Prosoft, Invensys Triconex, ICS TRIPLEX, Woodward, Bachmann, Schneider