DS200TCQAG1A | General Electric RST Analog I/O Board Mark V

DS200TCQAG1A | General Electric RST Analog I/O Board Mark V

Product Description P/N: DS200TCQAG1A Description / Specifications Description The DS200TCQAG1A is an RST Analog I/O Board designed for the Mark V Turbine Control System by General Electric. This board provides analog input and output functionality within the control system. It integrates with the Mark V system to manage and process analog signals required for turbine operation. The board is essential for interfacing analog devices with the control system, ensuring accurate signal processing and system control. 

 Technical Specifications Condition New / Never Used Surplus Manufacturer GE General Electric Series Mark V Part Number DS200TCQAG1 Functional Description RST Analog I/O Board Functional Acronym TCQA PCB Coating Normal Coating Assembly Type Normal Assembly Category PLCs/Machine Control Subcategory PC Board Computer Information About DS200TCQAG1A The DS200TCQAG1A is an Analog I/O Board designed for use within the Mark V Turbine Control System Series, produced by General Electric. This board is a component of the Mark V Series, which is associated with the control and management of wind, gas, and steam turbine automated drive systems. The Mark V Series, utilizing GE's patented Speedtronic control technology, represents one of the latter generations of this technology and is considered a legacy series due to its discontinuation after its initial release. The DS200TCQAG1A is a revision of the original DS200TCQAG1 Analog I/O Board, distinguished by its functional revision marked as A. Manufacturer information General Electric (GE) is a multinational conglomerate founded in 1892, based in the United States. 

It operates in various industries, including aviation, healthcare, renewable energy, and power. GE is known for its innovations in technology, manufacturing, and infrastructure solutions. IQElectro is not an authorized distributor. QElectro LLC (IQElectro) is NOT an Authorized Distributor or in any way affiliated with Rockwell Automation, Siemens, or any other Manufacturers. IQElectro is NOT an Authorized Dealer of this product. The product may be of older version, date codes, or design than that available from authorized dealers. As IQElectro is not an authorized dealer of this product, the Original Manufacturer's Warranty and Support DO NOT apply.IQElectro sells SURPLUS onlyand DOES NOT SELL SOFTWARE or FIRMWARE licenses For more detailed information, please refer to the full version of our disclaimer policy Disclaimer Policy.

OTHER INFORMATION

• Up to 1.26 GHz Pentium® III processor with 256 KB advanced  transfer cache  

• Up to 512 MB PC-133 SDRAM using a single SODIMM  

• Internal AGP SVGA controller with 4 MB display cache  

• 133 MHz system bus via Intel® 815E chipset  

• Dual Ethernet controllers supporting 10BaseT and 100BaseTX  interfaces  

• Optional PCI dual channel Ultra160 SCSI  

• Up to three (two with rear I/O support) PMC expansion sites  (IEEE-P1386 common mezzanine card standard, 5 V)  

• Up to 1 GB bootable flash on secondary IDE (optional)  

• Two 16-bit and two 32-bit programmable timers  

• 32 KB of nonvolatile SRAM  

• Software-selectable watchdog timer with reset  

• Remote Ethernet booting  

• Optional IDE hard disk drive  

• VME64 modes supported:  A32/A24/D32/D16/D08(EO)/MBLT64/BLT32  

• VMEbus interrupt handler, interrupter and system controller  

• Includes real time endian conversion hardware for littleendian and big-endian data interfacing (patent no. 6,032,212)  

• Enhanced bus error handling  

• Passive heat sink