GE DS2020DACAG2 - AC TO DC MODULE

GE DS2020DACAG2 - AC TO DC MODULE

Part Number DS2020DACAG2 Manufacturer General Electric Country of Manufacture As Per GE Manufacturing Policy Series Mark VI Function Module Availability In StockGeneral Electric Speedtronic Mark V DS2020DACAG2 is a Power Conversion Module that is a part of the Speedtronic legacy series. The part number DS2020DACAG2 is also known as a transformer assembly. This DACA is capable of converting VAC power to VDC power. 

Whether or not a battery backup is employed, this module can be used with the primary power source. It can also assist the control system when it loses power by providing it with some additional local energy storage, allowing it to ride through longer. This module does not have the ability to run diagnostics on its own. It can't even keep track of its input and output levels. Those functions will be handled by a separate device within the power distribution system. The DACA should only be used in particular areas where corrosive and combustible materials are not present. 

It should also only be used between the temperatures of -30 and +65 degrees Celsius, with a non-condensing humidity of 5-95 percent. The DS2020DACAG2 can be floor mounted in the drive cabinet with the help of special brackets and bolts. The DACA has four brackets, and using bolts to assist install it to the floor will guarantee that it is securely mounted.Module manufactured by General Electric as part of the Mark VI/VIe Series used in gas turbine sppedtronic control systems

OTHER INFORMATION

• Available with either the 1.1 GHz, 1.6 GHz or 1.8 GHz  Pentium® M processor  

• 1.4 GHz Pentium M processor coming soon  

• Up to 2 Mbyte of advanced L2 cache  

• Up to 1.5 Gbyte DDR SDRAM  

• Up to 2 Gbyte bootable CompactFlash on secondary IDE (see  ordering options)  

• Internal SVGA and DVI controller  

• Serial ATA support through P2 rear I/O  

• 400 MHz system bus via Intel® 855GME chipset  

• Ethernet controller supporting 10BaseT and 100BaseTX  through the front panel  

• Gigabit Ethernet controller supporting 10BaseT, 100BaseTX  and 1000BaseT interface with optional VITA 31.1 support  

• Four asynchronous 16550 compatible serial ports  

• Four Universal Serial Bus (USB) Rev. 2.0 connections, two on  the front panel and two rear I/O  

• PMC expansion site (PCI-X, 66 MHz)  

• 32 Kbyte of nonvolatile SRAM  

• Operating system support for Windows® XP, Windows 2000,  VxWorks®, QNX® , LynxOS® and Linux

Instructions and warnings related to the operation of the product:

The following specifications must be strictly observed:

 The technical specifications and typical applications of the product system must be strictly observed.

 PERSONNEL TRAINING: Only trained personnel may install, operate, maintain or repair the product system. These personnel must be instructed on the

These personnel must be instructed and briefed on the conditions in the hazardous area.

 Unauthorised modifications: No modifications or structural changes may be made to the product system.

 Maintenance Responsibility: It must be ensured that the product system is used only under appropriate conditions and in a condition fully suitable for use.

 Working environment: The user must fulfil the specified environmental conditions:

Safety regulations

The following safety regulations must be fully observed when (maintenance) work is carried out on the product system:

1 Disconnect completely.

2 Secure to prevent reconnection.

3 Confirm that the installation has been completed.

4 Perform grounding and short-circuiting.