GE DS2020FECNRX015A Field Exciter

GE DS2020FECNRX015A Field Exciter

Part Number DS2020FECNRX015A Manufacturer General Electric Country of Manufacture As Per GE Manufacturing Policy Series Mark VI/VIe Function Module Availability In StockDS2020FECNRX015A is a Field Exciter Module under the Mark V series of control systems. Up to a 24 A motor field can be excited by this module. It works with either non-plugging (NRX) or plugging non-reversing field supply (NRP). The component is developed as a 15 A drive control by General Electric. The GE Field Exciter Board includes seven jumpers and two three-terminal terminal blocks. The jumpers' names are JP1 through JP7. The GE Line Protection Board has many prong-type connectors. On another drive component, the board is mounted on standoffs. 

The signal wires that connect the board to the component to which it is connected begin on that component. DS2020FECNRX015A Installation Before the drive is installed, there are a few factors to take in mind while determining the installation site. Make that the power supply has an emergency shutoff device. If an emergency arises for the operator, servicer, or maintenance employees, it is vital that a shutdown device be accessible to disconnect all power to the drive. Because the drive will have various power sources, it's critical to have shut-off devices for all of them. Because of the potential for shock from groundless power cords and equipment, the surrounding area should also have all 3-prong outlets. The surrounding area's floor should likewise be clear of wetness. If the floor remains damp as a result of condensation, dehumidifiers may be required to dry the air. If there are puddles of water on the floor, keep it dry at all times to avoid shock.

OTHER INFORMATION

• Celeron™ socket 370-based single-board computer (SBC) with operating  system support for Windows NT®/Windows® 2000, Linux, VxWorks, QNX,  and Solaris 

• Special features for embedded applications 

— Up to 512 Mbyte IDE CompactFlash (optional) 

— Three programmable 16-bit timers 

— 32 Kbyte of battery-backed SRAM 

— Remote Ethernet booting supported 

— Software-selectable watchdog timer with reset 

— Supports VMEbus P2 connection to HD/floppy drive 

— PMC expansion site with VMEbus P2 I/O 

— PC•MIP expansion site supported 

— VME64 modes supported: A32/A24/D32/D16/D08(EO)/MBLT64/BLT32 

— VMEbus interrupt handler, interrupter, and system controller 

— Includes byte-swapping hardware for little-endian and big-endian data  interfacing (patent no. 6,032,212) 

— Enhanced bus error handling 

— Passive heat sink design (no moving parts) 

• Standard features include 

— Celeron socket 370 processor 

— Up to 256 Mbyte SDRAM using one 144-pin SODIMM 

— 64-bit Intel® AGP SVGA controller with 2 Mbyte SGRAM 

— On-board Fast Ethernet controller supporting 10BaseT and 100BaseTX  interfaces 

— On-board Ultra DMA/33 hard drive and floppy drive controllers with  VMEbus P2 I/O 

— Two high-performance 16550-compatible serial ports 

— PS/2-style keyboard and mouse port on front panel 

— Real-time clock and miniature speaker included